There is a problem with the Simscape Varistor Model
11 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Hi,
I wanted to notify that there is an error with the Varistor component in Simscape. To understand the model see the following component documentation Varistor -Voltage Dependent Resistor.
In this documentation we see that the ir the option to implement the power law for modeling the varistor, and the piecewise equation is the folowing:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1361828/image.png)
Using Desmos (left) and simulating the simscape model (right), this is how the V-I curve from one another:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1361833/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1361838/image.png)
The figure on the right was obtained applying a ramp current signal.
As yo can see, derivative in the normal to upturn transition is not continuous wich makes the graph on the right not look smooth. So clearly there is an error with the simscape model related to the constant "k".
I basically wanted to notify this issue, in case some one has encountered the same problem. And of course to make this error visible to make the Matlab staff to take note and fix it.
Thanks!
Antworten (0)
Siehe auch
Kategorien
Mehr zu Parameterization Methods finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!