An error occurred while running the simulation and the simulation was terminated Caused by: • Solver encountered an error while simulating model 'solarIM' at time 0.003327063
73 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
0 Kommentare
Antworten (1)
Sudarshan
am 16 Mär. 2023
Hello Amrapali Gamare,
The error message that you have shared indicates that one of the signals in your model is diverging to plus or minus infinity. It could be possible that a signal is changing too rapidly based on the solver settings.
This basically means that the solver is unstable for the equations represented by the model. I believe that it could be a stiff model that requires more stability for the solver.
A quick fix would be to select your solver as “ode45” and see if it works.
You can also refer to the documentation below to find out the correct solver for your model based on the requirements:
Another suggested way is to reduce the maximum order of the model as suggested in the documentation below:
Hope it helps!!
0 Kommentare
Siehe auch
Kategorien
Mehr zu Specialized Power Systems finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!