Arduino Mega not detect

I have trying the arduino mega 2560 communicate with simulink. When I trying with arduino uno its get communicated but when I try with arduino mega it not itself detected.

Answer 1

[Harsh Sanghai]

Hi,

There could be several reasons why your Arduino Mega 2560 is not detected by Simulink:

1. Driver Issues: Make sure that the proper driver for the Arduino Mega 2560 is installed on your computer. You can download the driver from the Arduino website.
2. USB Cable: Check that the USB cable you are using is properly functioning and is compatible with the Arduino Mega 2560. Try using a different USB cable to see if that solves the issue.
3. Port Selection: Make sure you have selected the correct port in Simulink for the Arduino Mega 2560. Go to the "Hardware" tab in Simulink and select "Connect to Hardware". Then select the correct port from the drop-down list.
4. Board Selection: Ensure that the correct board is selected in Simulink for the Arduino Mega 2560. Go to the "Hardware" tab in Simulink, click on "Configure Arduino Hardware", and select the Arduino Mega 2560 from the list.
5. Firmware: Verify that the firmware on your Arduino Mega 2560 is up-to-date and compatible with the version of Simulink you are using.