Terminal Weights to nlmpc

21 Ansichten (letzte 30 Tage)
Saskia Putri
Saskia Putri am 3 Mär. 2023
Kommentiert: Saskia Putri am 8 Mär. 2023
Hello everyone,
I am planning to add terminal weights and terminal constraints to my NMPC code. However, I am not sure how to define the cost function using the standard with additional terminal cost. Can anyone help me with this?
Thank you
Best,

Akzeptierte Antwort

Emmanouil Tzorakoleftherakis
Bearbeitet: Emmanouil Tzorakoleftherakis am 8 Mär. 2023
For nonlinear mpc, the easiest way to do that is to use the multistage formulation and block. Then you can set constraints/cost for the final stage to accomplish what you need. Here is an example that you can use as a reference.
You could also do the same with the generic nonlinear MPC formulation that you are currently using, but it is a bit more complex. An example that you can follow is here. Here, you would need to provide constraints and weights as vectors for the entire prediction horizon, for each time step. So you can see how much more convenient the multistage formulation is where you have the flexibility to define cost/constraints at every stage/time step.
For linear MPC you can just set the desired weights in the standard cost and then call setterminal.
  6 Kommentare
Emmanouil Tzorakoleftherakis
You should be able to do that. That would make the weights time varying, so you would need to provide them at runtime (here is the doc explanation for this). I cannot think of an existing example with nonlinear mpc that does that, but here is a linear mpc one. The concept is similar.
Saskia Putri
Saskia Putri am 8 Mär. 2023
Thank you very much!

Melden Sie sich an, um zu kommentieren.

Weitere Antworten (0)

Kategorien

Mehr zu Model Predictive Control Toolbox finden Sie in Help Center und File Exchange

Produkte


Version

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by