Filter löschen
Filter löschen

x values when taking a numerical derivative

21 Ansichten (letzte 30 Tage)
L'O.G.
L'O.G. am 6 Feb. 2023
Kommentiert: Star Strider am 6 Feb. 2023
I want to calculate the first derivative f(x) = dy/dx for data that is irregularly spaced in x. I think (correct me if I'm wrong) this can be done by diff(y)./diff(x)
But the resulting vector is one less than the length of the x and y vectors, so what are the corresponding x values? I want to then calculate x dy/dx, so it would be helpful to know what to use.

Akzeptierte Antwort

Star Strider
Star Strider am 6 Feb. 2023
I think (correct me if I'm wrong) this can be done by diff(y)./diff(x)
Not actually wrong, simply mistaken with respect to expecting that the result of diff will be what you want.
Use the gradient function (or Torsten’s approach, that does essentially the same operation) instead:
dydx = gradient(y) ./ gradient(x);
.
  6 Kommentare
Torsten
Torsten am 6 Feb. 2023
the support page for gradient says that FX = gradient(F) corresponds to /, so why do you recommend dividing by the gradient in x in this case?
Because in the case FX = gradient(F), the distance between the x values is assumed to be 1 for all of them.
Or do you think MATLAB knows how your x vector looks like if you don't supply it ?
Star Strider
Star Strider am 6 Feb. 2023
@Torsten — Thank you!

Melden Sie sich an, um zu kommentieren.

Weitere Antworten (4)

Sulaymon Eshkabilov
Sulaymon Eshkabilov am 6 Feb. 2023
Yes, you are right, e.g.:
x = [0 .2 .3 .45 .65 .75 .96]
x = 1×7
0 0.2000 0.3000 0.4500 0.6500 0.7500 0.9600
y = [-3 10 11 12 13 12 9]
y = 1×7
-3 10 11 12 13 12 9
dydx = diff(y)./diff(x)
dydx = 1×6
65.0000 10.0000 6.6667 5.0000 -10.0000 -14.2857
yyaxis left
plot(x, y, 'b-o', 'MarkerFaceColor', 'y', 'DisplayName', 'y(x)')
ylabel('y(x)')
yyaxis right
plot(x(1:end-1), dydx, 'r--p', 'MarkerFaceColor','c','DisplayName', 'dy/dx')
ylabel('dy/dx')
xlabel('x')
grid on
legend show
  2 Kommentare
L'O.G.
L'O.G. am 6 Feb. 2023
Bearbeitet: L'O.G. am 6 Feb. 2023
Thanks. So just to be clear, why does dydx(end-1) correspond to x(end)?
Sulaymon Eshkabilov
Sulaymon Eshkabilov am 6 Feb. 2023
difference1 is between 1 and 2 and then 2 and 3, etc., and thus end-1

Melden Sie sich an, um zu kommentieren.


Tushar Behera
Tushar Behera am 6 Feb. 2023
Bearbeitet: Tushar Behera am 6 Feb. 2023
Hi L'O.G,
I believe you want to calculate derivate for two separate datasets. In order to do that you can use 'diff(y)./diff(x)' for example:
clc;
clear;
close all;
x=linspace(0,2*pi,100);
y=sin(x);
yp=cos(x);
dx=diff(x);
dy=diff(y);
yp_hat=dy./dx;
err=yp(1:end-1)-yp_hat;
figure;
subplot(1,2,1);
plot(x,y);
hold on;
plot(x(1:end-1),yp_hat)
xlabel('x');
ylabel('y');
legend('original function','Approx derivative');
grid on;
subplot(1,2,2);
plot(x(1:end-1),err);
xlabel('x');
ylabel('error');
here 'x' and 'y' are two vectors and by using 'diff(y)./diff(x)' you can calculate the first order derivate which is 'cos(x)'. To answer the question which values of x corresponds to which 'yp_hat' . you can get that by using,
x(1:end-1)
I hope this solves your query.
Regards,
Tushar

Torsten
Torsten am 6 Feb. 2023
Bearbeitet: Torsten am 6 Feb. 2023
Use
n = numel(y);
dydx(1) = (y(2) - y(1))/(x(2) - x(1));
dydx(2:n-1) = (y(3:n) - y(1:n-2))./(x(3:n) - x(1:n-2));
dydx(n) = (y(n) - y(n-1))/(x(n) - x(n-1));

Sulaymon Eshkabilov
Sulaymon Eshkabilov am 6 Feb. 2023
Bearbeitet: Sulaymon Eshkabilov am 6 Feb. 2023
There will be some significantly different results from diff() and gradient() if the increment of x varies. See this simulation:
x = [0 .2 .3 .45 .65 .75 .96];
y = [-3 10 11 12 13 12 9];
dy1 = diff(y)./diff(x);
dy2 = gradient(y)./gradient(x);
for ii = 1:length(x)-1
dy3(ii) = (y(ii+1)-y(ii))/(x(ii+1)-x(ii));
end
N = numel(y);
dy4(1) = (y(2)-y(1))/(x(2)-x(1));
dy4(2:N-1) = (y(3:N)-y(2:N-1))./(x(3:end)-x(2:end-1));
dy4(N) = (y(end)-y(end-1))/(x(end)-x(end-1));
plot(x(1:end-1), dy1, 'b-o', 'MarkerFaceColor', 'y', 'DisplayName', 'diff', 'markersize', 13)
hold on
plot(x(1:end), dy2, 'rs--', 'MarkerFaceColor', 'c', 'DisplayName', 'gradient')
plot(x(1:end-1), dy3, 'g--p', 'MarkerFaceColor','y','DisplayName', 'Loop computed difference', 'MarkerSize', 10)
hold on
plot(x(1:end), dy4, 'k--h', 'MarkerFaceColor','c','DisplayName', 'vectorized: gradient')
ylabel('dy/dx')
xlabel('x')
grid on
legend show
% Note that as the increment of x gets smaller the error (offset) will also
% diminish. See this example: dx = 0.063467 vs. dx = 0.006289:
x=linspace(0,2*pi,100);
dx = x(2);
y=sin(x);
ANS=cos(x);
dY1=diff(y)./diff(x);
dY2 = gradient(y)./gradient(x);
for ii = 1:length(x)-1
dY3(ii) = (y(ii+1)-y(ii))/(x(ii+1)-x(ii)); % The same as diff()
end
n = numel(y);
dY4(1) = (y(2)-y(1))/(x(2)-x(1));
dY4(2:n-1) = (y(3:end)-y(1:end-2))./(x(3:end)-x(1:end-2));
dY4(n) = (y(end)-y(end-1))/(x(end)-x(end-1));
E1=ANS(1:end-1)-dY1;
E2 = ANS-dY2;
E3 = ANS(1:end-1)-dY3;
E4 = ANS-dY4;
fprintf(['Norm of errors @ dx = %f: ' ...
'E_diff = %f; E_gradient = %f; ' ...
'E_loop = %f; E_grad_vect = %f \n'], [dx, norm(E1) norm(E2) norm(E3) norm(E4)])
Norm of errors @ dx = 0.063467: E_diff = 0.223238; E_gradient = 0.004770; E_loop = 0.223238; E_grad_vect = 0.004770
% 10 times smaller incremental step of x than the previous example leads to
% the reduction of error norm to more than 3 times
x=linspace(0,2*pi,1000);
dx = x(2);
y=sin(x);
ANS=cos(x);
dY1=diff(y)./diff(x);
dY2 = gradient(y)./gradient(x);
for ii = 1:length(x)-1
dY3(ii) = (y(ii+1)-y(ii))/(x(ii+1)-x(ii)); % The same as diff()
end
n = numel(y);
dY4(1) = (y(2)-y(1))/(x(2)-x(1));
dY4(2:n-1) = (y(3:end)-y(1:end-2))./(x(3:end)-x(1:end-2));
dY4(n) = (y(end)-y(end-1))/(x(end)-x(end-1));
E1=ANS(1:end-1)-dY1;
E2 = ANS-dY2;
E3 = ANS(1:end-1)-dY3;
E4 = ANS-dY4;
fprintf(['Norm of errors @ dx = %f: ' ...
'E_diff = %f; E_gradient = %f; ' ...
'E_loop = %f; E_grad_vect = %f \n'], [dx, norm(E1) norm(E2) norm(E3) norm(E4)])
Norm of errors @ dx = 0.006289: E_diff = 0.070283; E_gradient = 0.000147; E_loop = 0.070283; E_grad_vect = 0.000147

Kategorien

Mehr zu Creating and Concatenating Matrices finden Sie in Help Center und File Exchange

Tags

Produkte


Version

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by