Filter löschen
Filter löschen

calculate psd using fft2 for 2-D matrix

95 Ansichten (letzte 30 Tage)
zein
zein am 22 Nov. 2022
Beantwortet: Garima am 16 Feb. 2024
I am trying to calculate the PSD using fft2 for 2D matrix, but I am not sure how to calculate the PSD from fft2
I have used the following lines when calculating the PSD for pressure time history data (p) using fft (1-D fast fourier transform)
fs=1/delta_t;
n = length(p);
FFT = fft(p);
FFT= FFT(1:n/2+1);
psd1 = 2*abs(FFT).^2/(n*fs);
f = fs*(0:(n/2))/n;
In case of having the pressure time history as 2-D array, I used fft2 but I not not sure how to calculate PSD
fs=1/delta_t;
nx=size(p,1);
ny=size(p,2);
FFT=fft2(p);
FFT=FFT(1:nx/2+1,1:ny/2+1);
psd1= 2*abs(FFT).^2/(nx*fs*ny*fs);
fx= fs*(0:(nx/2))/nx;
fy= fs*(0:(ny/2))/ny;

Antworten (2)

Gokul Nath S J
Gokul Nath S J am 26 Mai 2023
Hi Zein,
To calculate the 2D power spectral density (PSD) from a 2D signal using fft2 in MATLAB, you can follow the mentioned steps:
  1. Generate the signal:
% Generate a test signal
x = linspace(-1, 1, 100);
y = linspace(-1, 1, 100);
[X, Y] = meshgrid(x, y);
f1 = 10; % frequency component 1
f2 = 20; % frequency component 2
A1 = 0.5; % amplitude of component 1
A2 = 0.2; % amplitude of component 2
signal = A1*cos(2*pi*f1*X) + A2*cos(2*pi*f2*Y);
In this example, the signal is generated as the sum of two sinusoids with frequencies of 10 and 20 cycles per unit length, and amplitudes of 0.5 and 0.2 units, respectively. The signal is defined over a 2D grid with 100 points in each direction.
2. Compute the 2D Fourier transform of the signal using fft2:
% Take the 2D FFT of the signal
ft_signal = fft2(signal);
3. Compute the magnitude-squared of the Fourier transform:
% Compute the magnitude-squared of the 2D Fourier transform
psd = abs(ft_signal).^2;
In this example, abs is used to compute the magnitude of the complex values in the 2D Fourier transform, and .^2 is used to compute the squared magnitude, yielding a 2D array of real values representing the 2D PSD.
4. Plot the 2D PSD:
% Generate a plot of the 2D PSD
figure;
imagesc(psd);
axis xy;
xlabel('Frequency (cycles/unit length)');
ylabel('Frequency (cycles/unit length)');
title('2D Power Spectral Density');
In this example, imagesc is used to plot the 2D PSD as an image, with the frequency axis labeled in cycles per unit length.
The above steps illustrate a basic approach to computing the 2D PSD using fft2 in MATLAB. Note that the exact implementation may depend on the specifics of your signal and the desired characteristics of your PSD.
with regards,
Gokul Nath S J

Garima
Garima am 16 Feb. 2024
how will we get x and y wavenumber for such case??

Tags

Produkte


Version

R2020b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by