How to implement RIS(reconfigurable intelligent surface) in a FSO using gamma-gamma channel in MATLAB?
36 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
whats the MATLAB code for implementing this?
1 Kommentar
Soumen
am 20 Mai 2024
Matlab code available in this paper
https://ieeexplore.ieee.org/abstract/document/10067918
Antworten (1)
Vinayak
am 29 Aug. 2023
Hi,
Implementation of a complete FSO system involves many intricacies. A general high level overview of the entire process is as follows.
- Set up the FSO link: Define the parameters of the FSO link, such as the transmitter and receiver positions, transmit power, wavelength etc.
- Generate the RIS: Create the RIS by defining its size, position, and reflection coefficients.
- Calculate the channel gains: Use the geometrical optics approach to calculate the channel gains between the transmitter and the RIS, and between the RIS and the receiver. These gains depend on the distances, angles, and reflection coefficients.
- Simulate the gamma-gamma channel: Generate the gamma-gamma random variables to model the atmospheric turbulence-induced fading in the FSO link.
- Perform signal propagation: Simulate the signal propagation by applying the channel gains and the gamma-gamma fading to the transmitted signal. This involves multiplying the transmitted signal with the channel gains and the fading samples.
- Perform signal detection: At the receiver, apply the matched filter or maximum likelihood detection to estimate the transmitted symbols from the received signal.
Additonally, please refer to the Communication Toolbox if you have any specific questions pertaining to communication system modeling.
Thanks,
Vinayak
0 Kommentare
Siehe auch
Kategorien
Mehr zu Detection, Range and Doppler Estimation finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!