I need to model this equation in simulink.
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
How can we integrate a signal from t to t+Ts in Simulink.
0 Kommentare
Antworten (2)
Paul
am 7 Sep. 2022
Assuming the Qeustion is about specific values of t and Ts, i.e., integrate a signal over an interval ....
Put the integrator into an Enabled Subsystem. Set the enable signal input high at t and set it low at t + Ts.
2 Kommentare
Paul
am 7 Sep. 2022
Now I don't understand the Question. At simulation time = t, what value should be computed? Can't compute something at t + Ts, because that's in the future. Maybe you want the integral of the signal from t - Ts to t?
vamshi sai yele
am 14 Sep. 2022
As per my understanding you want to set the limits to integrate a signal.
I have tried it from my end and the solution is just take an Integrator Limited block from library on to the canvas and then double click the integrator block to tailor it. You will catch fields “Upper saturation limit” and “Lower saturation limit”.
Enter the upper limit (t+Ts) and lower limit (t) respectively and click on apply followed by okay. Now an integrator block with upper and lower limits are designed and we are all set to connect it to the signal generator and add the scope at the end to check/verify the output.
To summarize,
Library>Simulink>Continuous> Integrated Limited>drag onto the canvas>double click> enter upper and lower limits>apply.
For your reference and other figure properties figure kindly refer to this link
0 Kommentare
Siehe auch
Kategorien
Mehr zu Sources finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!