Data TTN to Thingspeak problem with Payload Decoder from Array
13 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Hello,
I have a question regarding decoding in TTN specifically for Thingspeak.
The code in Arduino IDE for a MKR1310 is the following:
String sensorString = String(airTemperatureReading);// + "-" + String(altitudeReading)+ "-" + String(pressureReading)+ "-" + String(sensorValueRain);
char payload[sensorString.length()+1];
sensorString.toCharArray(payload, sensorString.length() +1);
Serial.print(payload);
.
.
.
modem.beginPacket();
modem.write(payload, sizeof(payload));
Here I tested just one sensor data, to make it easier to understand whats going on with the payload function in general. But I didn´t really manage with that. In TTN the decoding is ok, so I get with the decoder -just for TTN usage- 24 from Hex 323400. However, now I have to switch the decoder to Thingspeak readable data but with the following Decoder I just get 50 in field1, but 24°C is the right temperature.
Decoder TTN:
function Decoder(bytes, port)
{
var tem = (bytes[0]<<0) | bytes[0];
return {
field1: tem
}
}
Test Byte Payload -> Complete uplink data
{
"f_port": 3,
"frm_payload": "MjQA",
"decoded_payload": {
"field1": 50
.
.
.
The complete Arduino Sketch is from here:
Thank you very much
2 Kommentare
Antworten (1)
Christopher Stapels
am 27 Jun. 2022
Around 4:01 in this video, I'm explaining my payload formatter. Or you can see the instructions in this example in the doc. The doc is a bit outdated for TTN, (version 2 instead of 3) but the payload formatting is still true. The video is up to date for version 3.
2 Kommentare
Christopher Stapels
am 13 Sep. 2023
Do you mean this video link in the post above? I just tried it and it worked for me at https://www.youtube.com/watch?v=b9Ga4nwnsTM
Siehe auch
Kategorien
Mehr zu Digital Input and Output finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!