link a full bridge DC/AC to an induction machine

hello friends

once again , i am needing help , i want to know how to link the output of the fullbridge DC to AC to the induction motor , ive used ps to simulink and the goto .. but its wont work

thank you so much

Answer 1

[Joel Van Sickel]

Hello Ayoub,

you are using a block specifically designed to be the arm of a multi-level converter, It is not a standard full bridge architecture, so there are no ports accessable to the portion that you would use for the ac portion of the circuit. It only has the dc input. The easiest thing to do would be to build the topology yourself with individual devices (either igbts or mosfets, I would start with ideal ones).

Regards,

Joel

Answer 2

[Pemendra Kumar Pardhi]

Hello ayoub reffai,

In your model you need to connected dc supply for converting DC to AC

you have used only voltage and current measurement block

Thank

Pemendra Kumar Pardhi

[ayoub reffai]

yes i see , i want to give whatever in input voltage and i want to have a poper ac voltage at the end but itw wont do that , i can joint the .slx file if you want , what matlab do you have 202b?

[ayoub reffai]

hellooooo

Answer 3

[Dr Narayanaswamy P R Iyer]

Hi: The PWM output is a gate pulse and is given to the G input of inverter through a four pulse gate multiplexer. The + and - terminals of inverter should be connected to a DC voltage source. Thanks.

P.R. NARAYANASWAMY. DR. NARAYANASWAMY P R IYER.