Why does integrating my signal attenuate it?
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Janith Wijekoon
am 18 Apr. 2022
Kommentiert: Janith Wijekoon
am 18 Apr. 2022
I fed a sine wave through an continuous time integral block as follows and noticed that the amplitude of the integrated output is much lower than the input signal, and it's also shifted up in the Y-axis. Why is this, and how should I account for it every time I include an integral in a model?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/967690/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/967695/image.png)
I'd also appreciate it if someone could tell me why the first few periods of the wave plotted by the scope here is much less smoother compared to the ones it plots later. Thanks!
0 Kommentare
Akzeptierte Antwort
Paul
am 18 Apr. 2022
Hi Janith,
If the input to the integrator block is u(t) = sin(w*t), the output of the integrator will be y(t) = -1/w*cos(w*t) + C. The constant, C, will be determined by the Initial Condition of the integrator block, which in this case is 0 based on the yellow curve. So
y(0) = 0 = -1/w*cos(w*0) + C = -1/w + C. So we have C = 1/w. Using that value of C the output y(t) is
y(t) = -1/w*cos(w*t) + 1/w = 1/w*(1 - cos(w*t))
The smoothness issue is probably related to the solver settings, assuming the model is using a variable step solver.
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Sources finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!