IIR Band Pass Filter Design for Signal Noise Cancellation
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
C PRASAD
am 21 Feb. 2022
Kommentiert: Sulaymon Eshkabilov
am 22 Feb. 2022
I have an EMG signal and I wolud like to Supress the noise by using Filter.The Filter is Butterworth Band Pass filter with cut-off frequency is 5Hz and 375Hz.I wolu like to know How to design a filter to apply on the EMG signal.
0 Kommentare
Akzeptierte Antwort
Sulaymon Eshkabilov
am 21 Feb. 2022
This is quite stratightforward issue. You can design a band-pass filter using the help given here: https://www.mathworks.com/help/signal/ref/butter.html
--
fs = 5e3; % Sampling frequency of your signal
n = 3; % Filter ORDER. Be careful while choosing it
Wn = [5 375]/fs; % Frequency band-pass
ftype = 'bandpass';
% Transfer Function Design
[b,a] = butter(n,Wn,ftype);
t=linspace(0, 1, fs);
S = 2.3*sin(2*pi*5*t)+.5*sin(2*pi*375*t)+1.25*sin(2*pi*475*t); % It has 3 freq components, viz. 5, 375, 475 Hz
SF = filter(b,a,S);
plot(t, S, 'r'), hold on; grid on
plot(t, SF, 'b'), legend('Raw data', 'Filtered data with band-pass filter', 'location', 'best')
xlabel('time, [sec]'),
ylabel('Signal Magnitude')
2 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Filter Design finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!