Why wont MATLAB let my plot using linspace?
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
clear all; close all; clc
F=5;D=7;E=2;
% AB, AX, BX, BC, CX, CW, CV, CD, DE; 9
% DV, EV, EU, ET, EF, FG, FT, GR, GT; 18
% GS, GH, HI, HR, IJ, IR, IP, IQ, JK; 27
% JP, KL, KP, KN, KO, LM, LN, NM, NO; 36
% OP, PQ, QR, RS, ST, UT, VU, WV, WX; 45
% Hoist, Fx, Fy; 48
dc = cosd((16+F)/2);
ds = sind((16+F)/2);
MVS = 1.73124; % Middle vertical strut length
TS = ((12+D)/12); % Top Strut
DSAX = TS/(norm([TS,MVS])); % Diagonal strut angle wrt horizontal axis
DSAY = MVS/(norm([TS,MVS]));
Truss = zeros(48);
increase = [];
for x = linspace(0.68,1.38,100)
Load = (1881/2)*x;
Truss(1,[1,2,47]) = [1*(dc),1*(dc),1]; % Point A in x and y direction
Truss(2,[1,2,48]) = [1*(ds),-1*(ds),1];
Truss(3,[1,4]) = [-1*(dc),1*(dc)]; % Point B in x and y direction
Truss(4,[1,3,4]) = [-1*(ds),-1,1*(ds)];
Truss(5,[4,5,7,8]) = [-1*(dc),-1*cosd(69),1*cosd(79.5),1*(dc)]; % Point C in x and y direction
Truss(6,[4,5,6,7,8]) = [-1*(ds),-1*sind(69),-1,-1*sind(79.5),1*(ds)];
Truss(7,[8,9]) = [-1*(dc),1]; % Point D in x and y direction
Truss(8,[8,10]) = [-1*(ds),-1];
Truss(9,[9,11,13,14]) = [-1,-1*DSAX,1*DSAX,1]; % Point E in x and y direction
Truss(10,[11,12,13]) = [-1*DSAY,-1,-1*DSAY];
Truss(11,[14,15]) = [-1,1]; % Point F in x and y direction
Truss(12,[16]) = [-1];
Truss(13,[15,17,18,20]) = [-1,1*DSAX,-1*DSAX,1]; % Point G in x and y direction
Truss(14,[17,18,19]) = [1*DSAY,-1*DSAY,-1];
Truss(15,[20,21]) = [-1,1]; % Point H in x and y direction
Truss(16,[22]) = [-1];
Truss(17,[21,23,24,25]) = [-1,1,-1*DSAX,1*DSAX]; % Point I in x and y direction
Truss(18,[24,25,26]) = [-1*DSAY,-1*DSAY,-1];
Truss(19,[23,27,46]) = [-1,1*(dc),-1*cosd(4)]; % Point J in x and y direction
Truss(20,[27,28,46]) = [-1*(ds),-1,1*sind(4)];
Truss(21,[27,29,30,31]) = [-1*(dc),1*(dc),-1*cosd(79.5),1*cosd(69)]; % Point K in x and y direction
Truss(22,[27,29,30,31,32]) = [1*(ds),-1*(ds),-1*sind(79.5),-1*sin(69), -1];
Truss(23,[29,33]) = [-1*(dc),1*(dc)]; % Point L in x and y direction
Truss(24,[29,33,34]) = [1*(ds),-1*(ds),-1];
Truss(25,[33,35]) = [-1*(dc),-1*(dc)]; % Point M in x and y direction
Truss(26,[33,35]) = [1*(ds),-1*(ds)];
Truss(27,[31,35,36]) = [-1*cosd(69),1*(dc),-1*(dc)]; % Point N in x and y direction
Truss(28,[31,34,35,36]) = [1*sind(69),1,1*(ds),-1*(ds)];
Truss(29,[36,37]) = [1*(dc),-1*(dc)]; % Point O in x and y direction
Truss(30,[32,36,37]) = [1,1*(ds),-1*(ds)];
Truss(31,[25,30,37,38]) = [-1*DSAX,1*cosd(79.5),1*(dc),-1]; % Point P in x and y direction
Truss(32,[25,28,30,37]) = [1*DSAY,1,1*sind(79.5),1*(ds)];
Truss(33,[38,39]) = [1,-1]; % Point Q in x and y direction
Truss(34,[26]) = [1];
Truss(35,[17,24,39,40]) = [-1*DSAX,1*DSAX,1,-1]; % Point R in x and y direction
Truss(36,[17,22,24]) = [1*DSAY,1,1*DSAY];
Truss(37,[40,41]) = [1,-1]; % Point S in x and y direction
Truss(38,[19]) = [1];
Truss(39,[13,18,41,42]) = [-1*DSAX,1*DSAX,1,-1]; % Point T in x and y direction
Truss(40,[13,16,18]) = [1*DSAY,1,1*DSAY];
Truss(41,[42,43]) = [1,-1]; % Point U in x and y direction
Truss(42,[12]) = [1];
Truss(43,[7,11,43,44]) = [-1*cosd(79.5),1*DSAX,1,-1*(dc)]; % Point V in x and y direction
Truss(44,[7,10,11,44]) = [1*sind(79.5),1,1*DSAY,1*(ds)];
Truss(45,[44,45]) = [1*(dc),-1*(dc)]; % Point W in x and y direction
% Truss(46,[6]) = [1];
%
% Truss(47,[2,5,45]) = [-1*(dc),1*cosd(69),1*(dc)]; % Point X in x and y directions
% Truss(48,[2,3,5,45]) = [1*(ds),1,1*sind(69),-1*(ds)]
Truss(46,[46]) = [14.25*sind(4)+MVS*cosd(4)];
Truss(47,[46,47]) = [-1*cosd(4),1];
Truss(48,[46,48]) = [1*sind(4),1];
%Constants Matrix
Forces = [0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;((Load*cosd(71))+(Load*cosd(9)));((Load*sind(71))-(Load*sind(9)));
0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;((Load*sind(9)*19.8)-(Load*sind(71)*19)-(Load*sind(71)*19.8));
((-Load*cosd(9))-(Load*cosd(71))-(Load*cosd(71)));((Load*sind(9))-(Load*sind(71))-(Load*sind(71)))];
solution = Truss\Forces; % Solving For INTERIOR Link forces
link_forces = solution([5 6])
increase = [increase,link_forces];
end
x = linspace(0.68,1.38,100);
plot(x,link_forces)
xlabel('Percent Increase of Load')
ylabel('Forces in the links identified by legend [kN]');
legend('CX','CW')
title('Change in struts with largest tension and compression Values based on load')
hold on;
0 Kommentare
Akzeptierte Antwort
Voss
am 7 Dez. 2021
link_forces contains just the last solution (i.e., for x == 1.38).
increase is your variable that contains all link_forces, so plot with that instead.
0 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Structural Analysis finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!