Multiscale dilation:structure unit does not change after imdilate by itself. What the multiscale dilation meaning?
    7 Ansichten (letzte 30 Tage)
  
       Ältere Kommentare anzeigen
    
g=[0 1 0;0 1 0;0 1 0];
n=3;
ng=g;
for i=1:n 
ng=imdilate(ng,g)
end
1 Kommentar
  DGM
      
      
 am 27 Nov. 2021
				The strel has a width of 1px.  Dilation with a 1px strel does no change.
A = zeros(5);
A(3,3) = 1
imdilate(A,1)
Antworten (1)
  Prachi Kulkarni
    
 am 1 Dez. 2021
        
      Bearbeitet: Prachi Kulkarni
    
 am 2 Dez. 2021
  
      Hi,
As per the definition of dilation described at the end of the documentation on imdilate, the structural element g when operated on the matrix ng should not lead to any change in the matrix ng.
This is not generally true. It is applicable to your particular definitions of the variables g and ng.
2 Kommentare
  DGM
      
      
 am 1 Dez. 2021
				
      Bearbeitet: DGM
      
      
 am 1 Dez. 2021
  
			That's obviously not generally true.  It's only true in this case because a 1px strel can intersect (sample) no more than a trivial neighborhood .  
g = ones(1);
n = 3;
ng = padarray(g,[5 5],0,'both');
for i=1:n 
    ng = imdilate(ng,g);
end
ng
A wider strel would effect a change.
g = ones(3);
n = 3;
ng = padarray(g,[5 5],0,'both');
for i=1:n 
    ng = imdilate(ng,g);
end
ng
It is perhaps worth pointing out that OP's strel is taller than 1 and will dilate vertically.  It's just that the output size is constrained such that it never has any effect.
g = ones(3,1);
n = 3;
ng = padarray(g,[5 5],0,'both');
for i=1:n 
    ng = imdilate(ng,g);
end
ng
  DGM
      
      
 am 2 Dez. 2021
				I'm sorry.  I trust you know that.  I just wanted to make sure that OP or a future reader didn't misinterpret it that way, and used the opportunity to elaborate on my own prior comments.
Siehe auch
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!