Compile error on Simulink with Arduino Due
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Hello.
Recently, Mathworks released support package for Arduino Due with simulink 2014a.
I tried to compile with simulink 2014a and there was an compile error regarding 'arm-none-eabi-gcc.exe'.
I cannot figure out the reason of that compile error
I tried it on other computers but it shows same error except one.
Is there any guy suffer from this problem? or is there any solutions?
Diagnostic viewer of Matlab shows this:
------------------------------------------------------------------
"Code Generation"
The call to realtime_make_rtw_hook, during the after_make hook generated the following error:
The build failed with the following message:
"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014a/arduino/include" -I"C:/MATLAB/SupportPackages/R2014a/arduino/blocks/sfcn/include" -I"C:/Users/biorobotics/Documents/MATLAB/arduinodue_gettingstarted_rtt" -I"C:/Users/biorobotics/Documents/MATLAB" -I"C:/MATLAB/SupportPackages/R2014a/arduinodue/arduinoduedemos" -I"C:/Program Files/MATLAB/R2014a/extern/include" -I"C:/Program Files/MATLAB/R2014a/simulink/include" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014a/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/arch/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=arduinodue_gettingstarted" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=154" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./arduinodue_gettingstarted.c ./arduinodue_gettingstarted_data.c ./ert_main.c
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
cs-make: *** [IPAddress.o] Error 255
The build process will terminate as a result.
The build failed with the following message: "C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014a/arduino/include" -I"C:/MATLAB/SupportPackages/R2014a/arduino/blocks/sfcn/include" -I"C:/Users/biorobotics/Documents/MATLAB/arduinodue_gettingstarted_rtt" -I"C:/Users/biorobotics/Documents/MATLAB" -I"C:/MATLAB/SupportPackages/R2014a/arduinodue/arduinoduedemos" -I"C:/Program Files/MATLAB/R2014a/extern/include" -I"C:/Program Files/MATLAB/R2014a/simulink/include" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014a/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/arch/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=arduinodue_gettingstarted" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=154" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./arduinodue_gettingstarted.c ./arduinodue_gettingstarted_data.c ./ert_main.c
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
cs-make: *** [IPAddress.o] Error 255
0 Kommentare
Antworten (5)
Sreeram
am 22 Jul. 2014
Hi,
Could you please post the model files if possible and that could be helpful in debugging?
Thanks, Sreeram Mohan
0 Kommentare
Markus
am 21 Okt. 2014
You must have admin rights for
- installation of matlab
- installation of the Hardware Support Packages
- usage of Matlab/Simulink
The usage of the Windows option „run as admin“ is the best way to do that.
This solution has been validated only under Windows 7.
2 Kommentare
Markus
am 13 Jan. 2015
My solution to fix that problem for Windows 7 and Windows 8.1:
- User has to have admin rights
- Create a new installation folder for Matlab (e.g. C:\MATLAB\R2014a\). Don’t use the Windows standard folders like (e.g. C:\Program Files\... or C:\Program Files (x86)\... )
- User has to have full access rights to this folder.
- Install Matlab with explicit administration rights
- Run Matlab with explicit administration rights and install the support packages
Can someone confirm this solution?
Dennis De Matteis
am 22 Jan. 2015
Hi, i recently had the same problem. Since my computer is in a company's domain network, i can not simply log in as admin. Thus i searched for another solution and got it working by adding the "Run as Admin" compatibility flag to the following executable's:
C:\Program Files\Matlab\R2014b\bin\matlab.exe and C:\MATLAB\SupportPackages\R2014b\arduino-1.5.6-r2\hardware\tools\g++_arm_none_eabi\bin\cs-make.exe
Good Luck!
Dennis
3 Kommentare
mohamad reza mohamadi
am 14 Jul. 2016
Hi , thank you for your help , but i do this and the error still occurs
mohamed abdelwahab
am 22 Mär. 2015
I have this issue in win 7 during using arduino due can anyone help me, please?
0 Kommentare
Siehe auch
Kategorien
Mehr zu Arduino Hardware finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!