Support for Fixed Reference Design
This workflow enables algorithm and system designers to generate an HDL IP core and integrate it into a fixed reference design for rapid prototyping. Create an SoC model based on the selected reference design for the supported Xilinx® MPSoC and RFSoC devices by using the SoC Model Creator tool. Use the created model as a template to design and simulate your FPGA algorithm and processor algorithm. Then, generate a bitstream and host I/O model, build a software application, and program the board by using the SoC Builder tool.
- Configure Design Using SoC Model Creator
Customize and design an SoC model by using the SoC Model Creator tool.
- Generate Design Using SoC Builder
Generate an SoC design and run it on the target hardware board using the SoC Builder tool.
- SoC Generation Workflows
Choose between the SoC Builder tool and the
socExportReferenceDesignfunction for deploying your design on an SoC device.
|SoC Model Creator
|Create SoC model based on selected reference design (Since R2021b)
|Configure the RF Data Converter on the RFSoC device from MATLAB (Since R2020b)