Check length of signal and bus names

Check ID: mathworks.jmaab.jc_0245

Guideline: jc_0245: Length restriction for signal and bus names

Checks if the length of the signal or bus names adheres to the maximum length restriction of 63 characters.

This check requires a Simulink^® Check™ license.

This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.

For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:

You can configure the following input parameters to customize the check action:

Input Parameter	Value	Default Value
Minimum length	Minimum length for the folder path.	1
Maximum length	Maximum length for the folder path.	64

Condition	Recommended Action
Signal or bus name in the model does not adhere to the length restriction of 63 characters.	Modify the signal or the bus names in the model so that the length of the names is not more than 63 characters.

Runs on library models.
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to graphical.
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to on.
Allows exclusions of blocks and charts.