Main Content

Smoothing (continuous->discrete)

Apply output smoothing when connecting variable-step network to fixed-step network

Since R2022a

  • Smoothing (continuous->discrete) block

Simscape / Utilities / Network Couplers / Fundamental Components



Prediction and smoothing algorithms are built into the Network Coupler blocks, and you can enable them by using the check boxes in the block dialogs. The prediction and smoothing blocks in the Fundamental Components sublibrary are provided for your reference only.

When variable-step network (Network 1) has high-frequency activity above what the fixed-step network (Network 2) can sample, applying smoothing to the output of Network 1 can sometimes be advantageous because it helps you avoid picking a local peak or trough of the Network 1 activity. The Smoothing (continuous->discrete) block uses a first-order filter to remove unwanted high-frequency information from the Network 1 output before providing the value to Network 2. The block implementation is a masked subsystem.

Smoothing (continuous->discrete) subsystem diagram



expand all

Connect this port to the variable-step network, Network 1, to capture its output.


expand all

Connect this port to the input of the fixed-step network, Network 2.


expand all

Specify the time constant for the first-order filter, in seconds. Typically, the smoothing time constant is at least 10 times larger than the step size of the fixed-step network, Network 2.

Specify initial output value for the variable-step network, Network 1.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2022a