Main Content

Test Bench Verification

The Simulink® PLC Coder™ software simulates your model and captures the input and output signals for a subsystem. The captured input and output signal data is the test bench data. You can generate a test bench or test harness by using the test bench data. See Generate Testbench for Subsystem.

You can verify that the output of the generated code is numerically and functionally equivalent to the output of the Simulink model by using the generated test bench. This table shows the error tolerance for the different data types. The comparison is between the outputs of the generated code (expected values) and outputs of the model (actual values).

Data TypeComparisonError Tolerance

The relative tolerance comparison for single or double data types uses this logic:

IF ABS(actual_value - expected_value) > (ERROR_TOLERANCE * expected_value) THEN
		testVerify := FALSE;

To verify the generated code by using the test bench, import the generated structured text and the test bench data into your target IDE. You can import test bench code either manually or automatically. See Import and Verify Structured Text Code.

Related Topics