Help CenterHelp Center
Set serial RTS pin
Since R2019b
setRTS(device,true)
setRTS(device,false)
example
setRTS(device,true) sets the specified serial request to send (RTS) pin.
device
setRTS(device,false) resets the specified serial RTS pin.
collapse all
Set and then reset the serial RTS pin.
device = serialport("COM3",9600); ⋮ setRTS(device,true) ⋮ setRTS(device,false)
Set and then reset the serial RTS pin using the VISA-Serial interface.
device = visadev("COM3"); ⋮ setRTS(device,true) ⋮ setRTS(device,false)
serialport
visadev
Serial port, specified as a serialport object or visadev object.
Example: setRTS(device,true) sets the RTS pin for the serial port connection device.
Example: setRTS(device,true) sets the RTS pin for the VISA-Serial resource device.
Introduced in R2019b
setDTR
Sie haben auf einen Link geklickt, der diesem MATLAB-Befehl entspricht:
Führen Sie den Befehl durch Eingabe in das MATLAB-Befehlsfenster aus. Webbrowser unterstützen keine MATLAB-Befehle.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office