spectrumestOptions
Description
Use a spectrumestOptions
object to specify options for estimating
spectral transfer function models using the spectrumest
function. You can specify options such as the numerical search method to be used in estimation
and whether to display estimation progress.
Creation
Description
creates the default
option set for opt
= spectrumestOptionsspectrumest
.
To modify the properties of this option set for your specific application, use dot
notation.
creates an option set with the properties specified using one or more name-value
arguments.opt
= spectrumestOptions(Name=Value
)
Properties
Display
— Option to display estimation progress
'off'
(default) | 'on'
Option to display the estimation progress, specified as one of the following values:
'on'
— Information on model structure and estimation results are displayed in a progress-viewer window.'off'
— No progress or results information is displayed.
InputInterSample
— Input-channel intersample behavior
'auto'
| 'zoh'
| 'foh'
| 'bl'
Input-channel intersample behavior for transformations between discrete time and continuous time, specified as 'auto'
, 'zoh'
,'foh'
, or 'bl'
.
The definitions of the three behavior values are as follows:
'zoh'
— Zero-order hold maintains a piecewise-constant input signal between samples.'foh'
— First-order hold maintains a piecewise-linear input signal between samples.'bl'
— Band-limited behavior specifies that the continuous-time input signal has zero power above the Nyquist frequency.
iddata
objects have a similar property,
data.InterSample
, that contains the same behavior value options.
When the InputInterSample
value is 'auto'
and
the estimation data is in an iddata
object data
, the
software uses the data.InterSample
value. When the estimation data
is instead contained in a timetable or a matrix pair, with the 'auto'
option, the software uses 'zoh'
.
The software applies the same option value to all channels and all experiments.
EstimateCovariance
— Option to generate parameter covariance data
true
(default) | false
Option to generate parameter covariance data, specified as true
or
false
.
If EstimateCovariance
is true
, then use
getcov
to fetch the covariance matrix
from the estimated model.
WeightingFilter
— Weighting prefilter
[]
(default) | vector | matrix | 'inv'
| 'invsqrt'
Weighting prefilter applied to the loss function to be minimized during estimation,
specified as one of the values in the following table. To understand the effect of
WeightingFilter
on the loss function, see Loss Function and Model Quality Metrics.
Value | Description |
---|---|
[] | No weighting prefilter is used. |
Passbands | Specify a row vector or matrix containing frequency values that
define desired passbands. You select a frequency band where the fit between
estimated model and estimation data is optimized. For example, specify
Passbands are expressed in
rad/ |
Weighting vector | Specify a column vector of weights. This vector must have the same length as the power spectrum data set. Each input and output response in the data is multiplied by the corresponding weight at that frequency. |
'inv' | Use |
'invsqrt' | Use |
SearchMethod
— Numerical search method used for iterative parameter estimation
'auto'
(default) | 'gn'
| 'gna'
| 'lm'
| 'grad'
| 'lsqnonlin'
| 'fmincon'
Numerical search method used for iterative parameter estimation, specified as the one of the values in the following table.
SearchMethod | Description |
---|---|
'auto' | Automatic method selection A combination of the
line search algorithms, |
'gn' | Subspace Gauss-Newton least-squares search Singular
values of the Jacobian matrix less than
|
'gna' | Adaptive subspace Gauss-Newton search Eigenvalues
less than |
'lm' | Levenberg-Marquardt least squares search Each
parameter value is |
'grad' | Steepest descent least-squares search |
'lsqnonlin' | Trust-region-reflective algorithm of This algorithm requires Optimization Toolbox™ software. |
'fmincon' | Constrained nonlinear solvers You can use the
sequential quadratic programming (SQP) and trust-region-reflective
algorithms of the
|
SearchOptions
— Option set for search algorithm
search option set
Option set for the search algorithm, specified as a search option set with fields that
depend on the value of SearchMethod
.
SearchOptions
Structure When SearchMethod
Is Specified
as 'gn'
, 'gna'
, 'lm'
,
'grad'
, or 'auto'
Field Name | Description | Default | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tolerance | Minimum percentage difference between the current value
of the loss function and its expected improvement after the next iteration,
specified as a positive scalar. When the percentage of expected improvement
is less than | 0.01 | ||||||||||||||||||||||||||||||
MaxIterations | Maximum number of iterations during loss-function minimization, specified as a positive
integer. The iterations stop when Setting
Use
| 20 | ||||||||||||||||||||||||||||||
Advanced | Advanced search settings, specified as a structure with the following fields.
|
SearchOptions
Structure When SearchMethod
Is Specified
as 'lsqnonlin'
Field Name | Description | Default |
---|---|---|
FunctionTolerance | Termination tolerance on the loss function that the software minimizes to determine the estimated parameter values, specified as a positive scalar. The
value of | 1e-5 |
StepTolerance | Termination tolerance on the estimated parameter values, specified as a positive scalar. The value of | 1e-6 |
MaxIterations | Maximum number of iterations during loss-function minimization, specified as a positive
integer. The iterations stop when The value of
| 20 |
SearchOptions
Structure When SearchMethod
Is Specified
as 'fmincon'
Field Name | Description | Default |
---|---|---|
Algorithm |
For more information about the algorithms, see Constrained Nonlinear Optimization Algorithms (Optimization Toolbox) and Choosing the Algorithm (Optimization Toolbox). | 'sqp' |
FunctionTolerance | Termination tolerance on the loss function that the software minimizes to determine the estimated parameter values, specified as a positive scalar. | 1e-6 |
StepTolerance | Termination tolerance on the estimated parameter values, specified as a positive scalar. | 1e-6 |
MaxIterations | Maximum number of iterations during loss function minimization, specified as a positive
integer. The iterations stop when | 100 |
Advanced
— Additional advanced options
structure
Additional advanced options, specified as a structure with the fields in the following table.
Field Name | Description | Default |
---|---|---|
MaxSize | Maximum number of elements in a segment when input-output data is split into segments.
| 250000 |
Examples
Create Default Option Set for Spectrum Estimation
opt = spectrumestOptions
Option set for the spectrumest command: Display: 'off' InputInterSample: 'auto' EstimateCovariance: 1 WeightingFilter: [] SearchMethod: 'auto' SearchOptions: '<Optimization options set>' Advanced: [1x1 struct]
Specify Options for Spectrum Estimation
Create an options set for spectrumest
using the 'gn'
search method, and set the Display
to 'on'
.
opt = spectrumestOptions(SearchMethod='gn',Display='on');
Alternatively, use dot notation to set the values of opt
.
opt = spectrumestOptions; opt.SearchMethod = 'gn'; opt.Display = 'on';
Version History
Introduced in R2022b
See Also
MATLAB-Befehl
Sie haben auf einen Link geklickt, der diesem MATLAB-Befehl entspricht:
Führen Sie den Befehl durch Eingabe in das MATLAB-Befehlsfenster aus. Webbrowser unterstützen keine MATLAB-Befehle.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)