Radiokonfiguration
Einstellen der Radiohardware-Parameter und Abstimmen der Radioeigenschaften
Bevor Sie Radiosignale mit einem ADALM-PLUTO Radio senden und empfangen können, müssen Sie zunächst die Radiohardware-Parameter einstellen und die Radioeigenschaften abstimmen.
Funktionen
configurePlutoRadio | Configure ADALM-PLUTO radio firmware |
findPlutoRadio | Report information about attached radios |
sdrdev | Create radio object for specific radio hardware |
sdrrx | Create receiver System object for radio hardware |
sdrtx | Create transmitter System object for radio hardware |
designCustomFilter | Design custom filter for Analog Devices AD936x RF chip |
info | Obtain radio information |
Klassen
comm.SDRDevPluto | Create object for Analog Devices ADALM-PLUTO radio |
Themen
- Baseband Sampling Rate and Filter Chains
Set the baseband sampling rate and filter chains for radio hardware.
- DC Offset Tracking
Reduce DC bias on the in-phase and quadrature components of a signal.
- Quadrature Tracking
Reduce I/Q imbalance on the in-phase and quadrature components of a signal.
Fehlersuche
Resolve issues encountered while installing or using the features of the support package.
