Statistik
0 Fragen
9 Antworten
RANG
2.479
of 300.813
REPUTATION
26
BEITRÄGE
0 Fragen
9 Antworten
ANTWORTZUSTIMMUNG
0.00%
ERHALTENE STIMMEN
5
RANG
of 21.086
REPUTATION
N/A
DURCHSCHNITTLICHE BEWERTUNG
0.00
BEITRÄGE
0 Dateien
DOWNLOADS
0
ALL TIME DOWNLOADS
0
RANG
of 171.169
BEITRÄGE
0 Probleme
0 Lösungen
PUNKTESTAND
0
ANZAHL DER ABZEICHEN
0
BEITRÄGE
0 Beiträge
BEITRÄGE
0 Öffentlich Kanäle
DURCHSCHNITTLICHE BEWERTUNG
BEITRÄGE
0 Discussions
DURCHSCHNITTLICHE ANZAHL DER LIKES
Feeds
Why is uncertainty parameter outside input-output loop not linearised in robust control toolbox?
Hi J. Van, This is the expected behavior. When the uncertainty is not in the linearization path given the input and output lo...
mehr als 11 Jahre vor | 0
| akzeptiert
Model Reference Blocks and systune
Hi Jim, I would recommend to make sure that the blocks you specify to be tuned (and all their parent models all the way to th...
mehr als 11 Jahre vor | 0
How does source affect Simulink's frequency response estimation?
Hi Lauri, This is a common issue frequency response estimation users encounter. Simulink Control Design offers ways to find a...
mehr als 12 Jahre vor | 1
Control Design: Linearization at multiple operating points simultaneously
Another alternative would be to use "Linearize At..." menu item in Operating Point drop down (2nd from the top, below "Model Ini...
fast 13 Jahre vor | 0
how to copy LTI viewer figure to clipboard?
Hi Noam, This is an excellent suggestion, currently it is not possible to do it inside the linear analysis tool. But as a wor...
etwa 14 Jahre vor | 1
| akzeptiert
Integers in control loops
Hi Mark, How are you rounding your controller output? If you are using the quantizer block, there is a checkbox for "treat ga...
mehr als 14 Jahre vor | 1
| akzeptiert
Linearization gives accurate results with Simulink Control Design but not with linmod
The underlying reason can be a lot of things for the difference: # If you have more than one input/output points, the channels ...
mehr als 14 Jahre vor | 0
(Simulink/MPC) Unable to linearize with an if...else loop
Hi Tan, The Embedded MATLAB function blocks are linearized using numerical perturbation by default. Your code seems to indica...
mehr als 14 Jahre vor | 1
Computing Operating point using Simulation Snapshots
Hi Tan, To stop the model from trying to initialize from a no longer existent operating point, you can go to the menu in Simu...
mehr als 14 Jahre vor | 1
| akzeptiert
