Martin Enderwitz

Last seen: etwa ein Monat vor | Aktiv seit 2015

Followers: 0 Following: 0

Nachricht

Statistik

All

Feeds

Beantwortet
Wireless Testbench Radio Setup fails at the loopback test for USRP X300
Please reach out to Technical Support so we can provide further assistance on this issue. You can get in touch here.

etwa 2 Monate vor | 0

Beantwortet
Connect USRP-2974 using Wireless Testbench
While we have not been able to test and verify that Wireless Testbench works with the USRP-2974, it should theoretically be poss...

etwa ein Jahr vor | 0

Beantwortet
How to implement Multiple USRPs for Synchronised Operation using wireless testbench
Hi Ahmed, The basebandTransmitter does not currently support the use of multiple USRPs to transmit. You can instead use the co...

mehr als ein Jahr vor | 1

Beantwortet
Garbage Data received for USRP X310 using Loopback Test (Wireless Testbench)
Hi Uzair, I've tried your script on our own X310 setup and was unable to reproduce the noisy spectrum you've shown. The signal ...

fast 3 Jahre vor | 0

Beantwortet
Change RF parameters from matlab using libiio on adrv9361z7035
The Communications Toolbox Support Package for Xilinx Zynq-Based Radio is based on the reference design provided by Analog Devic...

mehr als 4 Jahre vor | 0

| akzeptiert

Beantwortet
How to configure Vivado 2018.2 System Generator for R2019a
Xilinx System Generator for DSP is not used as part of the standard workflow for the example, HW/SW Co-Design with AXI4-Stream U...

mehr als 4 Jahre vor | 0

Beantwortet
Frame Size Modification of Zynq AD9361's QPSK models
For the transmitter, the frame size is controlled by the dimensions of the data sent to the data input port on the block. For t...

mehr als 4 Jahre vor | 1

Beantwortet
Failed to find device: cf-ad9361-lpc.
Hi, There are a few things to consider to resolve the issues you are seeing: The example you are working with demonstrates HW/...

etwa 5 Jahre vor | 0

| akzeptiert

Beantwortet
Can the USRP Radio Support Package be used to run programs on the Ettus or do you need to transform code into VHDL in a program like HDL Coder?
Hi Tyler, At present, there are two support packages available for use with Ettus USRP devices. Communications Toolbox™ Suppor...

mehr als 6 Jahre vor | 1

| akzeptiert

Beantwortet
The USB interface of PZSDRCC-BRK-G carrier board doesn't work with the Matlab/Xilinx firmware
Hi Ethan, Sorry, I misunderstood your original question. At present, the MathWorks firmware does not currently support thi...

mehr als 7 Jahre vor | 0

Beantwortet
The USB interface of PZSDRCC-BRK-G carrier board doesn't work with the Matlab/Xilinx firmware
Hi Ethan, If I understand correctly, you're trying to use the USB-OTG to port on the carrier to provide the connection betw...

mehr als 7 Jahre vor | 0

Beantwortet
I cannot find Communications System Toolbox™ Support Package for Analog Devices® ADALM-Pluto Radio,
Hi Victor, The Support Package for Analog Devices® ADALM-Pluto Radio was released with R2017a and requires MATLAB R2017a as t...

mehr als 8 Jahre vor | 0

Gelöst

Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...

etwa 10 Jahre vor