Beantwortet
How can I stack flexible bodies while using spatial contact forces between them?
The Spatial Contact Force block has a geometry port as its interface. You can attach rigid geometry to the flexible body blocks...

etwa 3 Jahre vor | 0

Beantwortet
Can't find equilibrium on simscape multibody/ can't put the steady state by default
There are a few adjustments you should make to your model. Set the Consistency Tolerance in the Solver Configuration block to 1...

etwa 3 Jahre vor | 0

| akzeptiert

Beantwortet
Bugs of Error | Actuator torque acting on joint primitive
It is hard to give you a specific answer without looking at the model. I believe you are applying a discrete motion signal, whi...

etwa 3 Jahre vor | 0

| akzeptiert

Beantwortet
Simscape Multibody torque measurement on bushing joint seems wrong.
Hi Lukas, Your model is delivering the correct results. The force is being applied along the global z-axis, local y axis. The...

etwa 3 Jahre vor | 0

Beantwortet
Unstability of spherical joint
Without your model, it is difficult to give you specific advice. If "fails" means that the spherical joint starts moving due to...

etwa 3 Jahre vor | 0

Beantwortet
How to make a "sail" change its angle relative to way the submarine is moving?
Can you share the model? It would make it easier to give you specific advice. As long as the joint is configured to accept joi...

etwa 3 Jahre vor | 0

Beantwortet
get Solid blocks derived inertia and mass values
The derived properties are displayed on the block, but are not accessible via get_param(). If you want to automate getting th...

etwa 3 Jahre vor | 0

Beantwortet
loaded flexible beam as initial position Simscape
This is a great model - thanks for showing the animation. You cannot specify the initial deflection for the beam through R2022b...

etwa 3 Jahre vor | 0

| akzeptiert

Beantwortet
radius of disc brake block
The Disc Brake block lets you specify the radius to the brake pad, which is what is needed to determine the amount of brake torq...

etwa 3 Jahre vor | 0

| akzeptiert

Beantwortet
Coding a simple model with torsion spring
I think this example model will help you see a way to model this system: Mechanical Rotational System with Stick-Slip Motion ...

etwa 3 Jahre vor | 0

Beantwortet
INVERTED PENDULUM CONTROL
Try looking at this tutorial:Inverted Pendulum: Simscape Modeling https://ctms.engin.umich.edu/CTMS/index.php?example=Inver...

etwa 3 Jahre vor | 0

Beantwortet
Im using spatial contact force between a plane and wheel but when i run the simulation the wheel falls freely. Is it a correct response or it has to stay attached to plane?
Here are some things you can try: Set the maximum step size to something small (like 0.01) to make sure the solver takes a step...

etwa 3 Jahre vor | 0

Beantwortet
If you want to input holding torque to the joint block
You can use joint modes to lock the degree of freedom, and then release it when you want the joint to move. This will, however,...

etwa 3 Jahre vor | 0

Beantwortet
How to Determine the value of Internal Mechanics of Joint Primitive like Spring Stiffness and Damping Coefficient?
Hi @sanjeev kumar, A Revolute Joint in Simscape Multibody permits one degree of freedom. If you want to define damping and spr...

etwa 3 Jahre vor | 0

Beantwortet
Simscape - multibody - frames and transforms - world frame
You need to install Simscape and Simscape Multibody to have access to the Simscape Multibody block libraries. --Steve

etwa 3 Jahre vor | 0

Beantwortet
simscape kinematic loop don't accept motion input on cylindrical joint
Each of the joints in your mechanism has a target position (and possibly velocity) specified. You need to disable the targets o...

etwa 3 Jahre vor | 0

Beantwortet
simscape multibody switching signals (due to Contact Library)
The Simscape Multibody Contact Force Library has blocks that accept an input signal that can disable the force. Look for the bl...

etwa 3 Jahre vor | 0

Beantwortet
Based on geometric Feature option is disabled
You are likely importing an STL file. STL files do not contain the features needed to assign frames. Frame locations and orien...

etwa 3 Jahre vor | 0

Beantwortet
how make changeable joint limits in simscape ?
You will need to apply the joint limits as an external force. Measure the positions of each part/joint, calculate when the forc...

etwa 3 Jahre vor | 0

Beantwortet
How to effectively and optimally simulate multiple robotic platforms in Simscape Multibody
There are many ways to accelerate your model. These can be combined for further speedup. Simplify the quadcopter model - can y...

etwa 3 Jahre vor | 1

| akzeptiert

Beantwortet
Nonlinear iteration is not converging (using ode23t) in Simscape Multibody
For situations like this, it is possible that changes to the model and the solver settings could enable the simulation to run wi...

etwa 3 Jahre vor | 0

Beantwortet
Single degree of freedom
This example shows you how to model this system in two ways: https://www.mathworks.com/help/simscape/ug/mass-spring-damper-...

etwa 3 Jahre vor | 0

Beantwortet
Plotting a potential energy function
Please read this post: https://www.mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answers-and-get-a...

etwa 3 Jahre vor | 0

Beantwortet
Getting started solving ODE's - solve m [d^2(theta)/dt^2] + c [d(theta)/dt^2] + k sin(theta) = 0
As mentioned by Roger above: I think you have no choice but to solve it numerically. Even without the friction term in the midd...

etwa 3 Jahre vor | 0

Beantwortet
how can improved gray scale quantization
As mentioned above: Improved over what? What's wrong with the way you're doing it now? Read this link then come back with an im...

etwa 3 Jahre vor | 0

Beantwortet
Index exceeds matrix dimensions
As posted by Geoff in the comments above: The usual procedure is to read the error message, go to the source file and line numb...

etwa 3 Jahre vor | 0

Beantwortet
What is the code to integrate a fixed equation ; Cp = a + bT + cT^2 + dT^3 with varying values of a, b, c, d and T?
Please see this post: https://www.mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answers-and-get-a-...

etwa 3 Jahre vor | 0

Beantwortet
plot
Please see this post: http://www.mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answers-and-get-a-f...

etwa 3 Jahre vor | 0

Beantwortet
Help creating a function file
As suggested above, read this post: http://www.mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answe...

etwa 3 Jahre vor | 0

Beantwortet
How to define inertia of a body block in SimMechanics?
For symmetrical objects, such as a sphere or a cylinder, the inertia matrix will have the moments of inertia along the diagonal ...

etwa 3 Jahre vor | 0

Mehr laden