cr28
Followers: 0 Following: 0
MSc
Professional Interests: energy storage systems, smart grids, renewable energy sources
Statistiken
RANG
8.046
of 290.033
REPUTATION
5
BEITRÄGE
10 Fragen
4 Antworten
ANTWORTZUSTIMMUNG
20.0%
ERHALTENE STIMMEN
2
RANG
1.980 of 19.625
REPUTATION
892
DURCHSCHNITTLICHE BEWERTUNG
4.70
BEITRÄGE
2 Dateien
DOWNLOADS
17
ALL TIME DOWNLOADS
8672
RANG
of 144.427
BEITRÄGE
0 Probleme
0 Lösungen
PUNKTESTAND
0
ANZAHL DER ABZEICHEN
0
BEITRÄGE
0 Beiträge
BEITRÄGE
0 Öffentlich Kanäle
DURCHSCHNITTLICHE BEWERTUNG
BEITRÄGE
0 Highlights
DURCHSCHNITTLICHE ANZAHL DER LIKES
Feeds
Gesendet
data file to the post 'grid energy storage battery'
data file of real and reactive power for 24 hrs with a 1 minute resolution
mehr als 11 Jahre vor | 3 Downloads |
Gesendet
grid energy storage battery
this circuit was built to simulate energy storage at the low voltage network.
mehr als 11 Jahre vor | 14 Downloads |
Frage
odd values of real and reactive power
In an electrical network model i built, there's a transformer that steps down voltage to 240V. I'm getting values of reactive ...
mehr als 11 Jahre vor | 0 Antworten | 0
0
Antwortencombining/concatenation mat files
thanx Azzi but this gives me a file with data written side by side i.e i get a file with 12 column...how do i merge them one bel...
mehr als 11 Jahre vor | 0
Frage
combining/concatenation mat files
Hi, i have 4 mat files in the array format(these files are outputs from a simulink model). the variables are the same in all ...
mehr als 11 Jahre vor | 5 Antworten | 0
5
AntwortenFrage
difference in values from similar blocks
I'm doing a discrete mode simulation of an electrical network using simpower systems. the loads in the model have a P/Q ration o...
mehr als 11 Jahre vor | 0 Antworten | 0
0
AntwortenFrage
SIMULINK model error with 'to file'
A simulink model i created worked fine on my university system and laptop. I then added a few 'to file' blocks (to save on ram d...
mehr als 11 Jahre vor | 2 Antworten | 0
2
AntwortenFrage
transformer output amplitude increasing oscillations
An electrical circuit I have been building is giving me strance oscillations just downstream of the transformer. The circut and ...
mehr als 11 Jahre vor | 1 Antwort | 0
1
AntwortFrage
using the correct source
the controlled voltage and the three-phase source block appear to be ideal voltage sources because in a simulink model that has ...
mehr als 11 Jahre vor | 0 Antworten | 0
0
AntwortenFrage
Choosing a simulation type
Hi, I'm modelling an electrical network for a 24 hour period and looking at voltage swings and regulation.Continuous mode with ...
mehr als 11 Jahre vor | 1 Antwort | 0
1
AntwortFrage
phasor vs continuous simulation
running 'power_dynamicload' from the command line brings up the model of the dynamic load example. *1]* running it in phasor ...
mehr als 11 Jahre vor | 1 Antwort | 0
1
AntwortFrage
Simulink: Dynamic load, external PQ
A followup question to this..... http://www.mathworks.com/matlabcentral/answers/10424 Hi, I'm doing something similar to wha...
mehr als 11 Jahre vor | 0 Antworten | 0
0
AntwortenHow to use a lookup table to feed parameters to a dynamic load ? Or some other way to easily adjust load PQ values? (simulink - simpower)
Hi, I'm doing something similar to what Radu did/tried to do ie external control of PQ using the demand data I have over 24 hour...
mehr als 11 Jahre vor | 0
single phase and three phase dynamic load
Samir, All i can say is when i simulated a 3-phase dynamic load in phasor mode, the simulation was quick.....a lot quicker th...
mehr als 11 Jahre vor | 0
Frage
control system for battery
I'm working on grid level electrical storage. The modelling process is being performed in simulink and i began using for the fir...
mehr als 11 Jahre vor | 0 Antworten | 0