How can I solve the problem of designing state observer when using model predictive control toolbox
8 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
When using the model predictive control toolbox, the matlab always says that,'Problems encountered when designing the overall state observer (Kalman filter)'. Is there anybody who can solve this problem? Thank you very much!!!!
0 Kommentare
Antworten (2)
André Paradis
am 6 Jul. 2014
For Model Predictive control purposes, your system must be observable in its state-space representation.
This being said, an observable system can become unobservable do to numerical errors. Thus, you could modify the state estimator gain using :
setestim(MPCobj,M);
Also, if your system is not defined in a state-space representation (e.g. TF), MATLAB will convert it to one. In this case, try using
MPCobj.Model.Plant=ss(model,'min');
Where your system will converted in its state-space representation with the minimal number of states.
Hope this helps
1 Kommentar
fariba
am 27 Apr. 2015
dear andre i have this problem with my mpc. what do you mean ,modify modify the state estimator gain? my gain in mpc is like below M =
1.0e+03 *
0.0013 -0.0134
0.0000 0.0001
0.1136 -1.1636
0.0000 0.0000
-0.0000 -0.0000
0.0000 0.0000
0.0000 -0.0000
-0.0003 0.0134
what should i do?
fariba
am 26 Apr. 2015
dear andre i have this problem with my mpc. what do you mean ,modify modify the state estimator gain? my gain in mpc is like below M =
1.0e+03 *
0.0013 -0.0134
0.0000 0.0001
0.1136 -1.1636
0.0000 0.0000
-0.0000 -0.0000
0.0000 0.0000
0.0000 -0.0000
-0.0003 0.0134
what should i do?
0 Kommentare
Siehe auch
Kategorien
Mehr zu Controller Creation finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!