Is there a bug in show function of Robotics System Toolbox of 2021a version?
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
siyong xu
am 31 Mai 2021
Beantwortet: Yiping Liu
am 1 Jun. 2021
It seems there is a bug in `show` function.
This is a simple robot model built using DH parameters.
dhparams = [0 pi/2 0 0;
0.4318 0 0 0
0.0203 -pi/2 0.15005 0;
0 pi/2 0.4318 0;
0 -pi/2 0 0;
0 0 0 0];
robot = rigidBodyTree;
body1 = rigidBody('body1');
jnt1 = rigidBodyJoint('jnt1','revolute');
setFixedTransform(jnt1,dhparams(1,:),'dh');
body1.Joint = jnt1;
addBody(robot,body1,'base')
body2 = rigidBody('body2');
jnt2 = rigidBodyJoint('jnt2','revolute');
body3 = rigidBody('body3');
jnt3 = rigidBodyJoint('jnt3','revolute');
body4 = rigidBody('body4');
jnt4 = rigidBodyJoint('jnt4','revolute');
body5 = rigidBody('body5');
jnt5 = rigidBodyJoint('jnt5','revolute');
body6 = rigidBody('body6');
jnt6 = rigidBodyJoint('jnt6','revolute');
setFixedTransform(jnt2,dhparams(2,:),'dh');
setFixedTransform(jnt3,dhparams(3,:),'dh');
setFixedTransform(jnt4,dhparams(4,:),'dh');
setFixedTransform(jnt5,dhparams(5,:),'dh');
setFixedTransform(jnt6,dhparams(6,:),'dh');
body2.Joint = jnt2;
body3.Joint = jnt3;
body4.Joint = jnt4;
body5.Joint = jnt5;
body6.Joint = jnt6;
addBody(robot,body2,'body1')
addBody(robot,body3,'body2')
addBody(robot,body4,'body3')
addBody(robot,body5,'body4')
addBody(robot,body6,'body5')
showdetails(robot)
show(robot);
axis([-0.5,0.5,-0.5,0.5,-0.5,0.5])
axis off
But there are something wrong with the figure ploted by show funciton: when I click the axis of some body, the arrow that shows the revolute direction is not coinside with the axis, just like this
When I click the body 3, is shows the z axis of body 2, and when I click the body2, it shows the z axis of body1.
So, is there a bug of show function? Because the show funciton in MATLAB 2020a is normal.
0 Kommentare
Akzeptierte Antwort
Yiping Liu
am 1 Jun. 2021
So the plot from 20a (LEFT) is incorrect, and this bug has been fixed in 21a (the plot on the RIGHT shows the correct joint axis).
For a robot specified using DH parameters, when you click on body3, its rotation axis happens to be aligned with the z axis of body2's body frame.
0 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Robotics finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!