Kinematic Analysis of 5dof Manipulaor Arm Simscape MultiBody
6 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Joe Bennet am 31 Mär. 2021
Beantwortet: Juan Sagarduy am 31 Mär. 2021
I have a 5DOF manipultor, that I have successfully imported into simulink using the multibody toolbox. However, I am trying to the perform forward and inverse kinematic analysis of the manipultor to ensure what I have done myself is correct. There is an example for these calculations on the help center, but for someone who has very little experience with robotics they are difficult to wrap the head around. I do wonder if there is a way to import the code required to perform the kinematics automatically from the screen shown in the attached photo. Alternativly, does anyone know of or have an example that I could see to try and understand this pretty difficult topic?
Any help would be appreciated enormously!!
Juan Sagarduy am 31 Mär. 2021
Cool to see that you use Simscape Multibody. You need to set the joints in kinematic mode to accomodate the prescribed motion. The look up table contains information that you can include in a acript for all of your 5 DOF. Then, in the robotic toolboxes, you may find more advanced and automatic ways for path/duty planning.
Hope this gives you an indication on how to proceed.
ic path for specific robot types.
Weitere Antworten (0)
Find more on Simulation and Analysis in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!Start Hunting!