Error with continuous time block when building c2000_motor_algo example
15 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I am working through the c2000_motor_algo example in an attempt to familiarize myself with the basics of simulink coder. When I build the program in accordance with the instructions under "Task 2" in the documentation, I get the error:
- Block 'c2000_motor_algo/Position signal/Clock' uses continuous time, which is not supported with the current configuration. Consider selecting the support 'continuous time' option on the Configuration Parameters > Code Generation > Interface pane
And a similar error for the startTime block. I tried changing the 'continuous time' option as instructed, but then received the error,
- The Embedded-C code format does not support continuous sample time blocks
I cannot change the blocks to discrete time blocks because the file is locked (presumably because its an example).
I'm using Matlab 2012b. My target preferences are configured for a Custom board, F28335. I have my solver set to discrete, fixed-step, auto step size.
Another posting had a similar problem, but without a satisfactory resolution: http://www.mathworks.com/matlabcentral/answers/36601-the-embedded-c-code-format-does-not-support-continuous-sample-time-blocks
I appreciate any input!
1 Kommentar
Kaustubha Govind
am 19 Mär. 2013
I'm not sure which library the startTime block belongs to, but I don't think the Clock block is recommended for generating embeddable code. You probably need to use a target-specific implementation of the Clock.
Antworten (0)
Communitys
Weitere Antworten in Power Electronics Control
Siehe auch
Kategorien
Mehr zu Deployment, Integration, and Supported Hardware finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!