Error in plotting the waves.

4 Ansichten (letzte 30 Tage)
Heya :)
Heya :) am 26 Nov. 2020
Kommentiert: Walter Roberson am 26 Nov. 2020
I am supposed to get the two waves as showing in the picture with this code. Can anybody please spot the error or refine the code
as I am getting two straight lines only.
close all; clear all; clc;
%initializing x,y,t
h=0.05; %step size
t=0:h:400;
x1 = zeros(1,numel(t)); y1 = x1; x2 = x1; y2 = x1;
x1(1)=1;
y1(1)=1;
x2(1)=2;
y2(1)=2;
%value of constants
a=0.1;
b=0.3;
omega=4;
Cnp=0.2;
G=1;
%ode
p=@(x1,y1,x2,y2) (a-x1^2-y1^2)*x1-omega*y1+G*Cnp*(x2-x1);
q=@(x1,y1,x2,y2) (a-x1^2-y1^2)*y1+omega*x1+G*Cnp*(y2-y1);
%loop
for i=1:(length(t)-1)
k1=p(x1(i),y1(i),x2(i),y2(i));
l1=q(x1(i),y1(i),x2(i),y2(i));
k2=p((x1(i)+(h/2)*k1),(y1(i)+(h/2)*l1),(x2(i)+(h/2)*k1),(y2(i)+(h/2)*l1));
l2=q((x1(i)+(h/2)*k1),(y1(i)+(h/2)*l1),(x2(i)+(h/2)*k1),(y2(i)+(h/2)*l1));
k3=p((x1(i)+(h/2)*k2),(y1(i)+(h/2)*l2),(x2(i)+(h/2)*k2),(y2(i)+(h/2)*l2));
l3=q((x1(i)+(h/2)*k2),(y1(i)+(h/2)*l2),(x2(i)+(h/2)*k2),(y2(i)+(h/2)*l2));
k4=p((x1(i)+k3*h),(y1(i)+l3*h),(x2(i)+k3*h),(y2(i)+l3*h));
l4=q((x1(i)+k3*h),(y1(i)+l3*h),(x2(i)+k3*h),(y2(i)+l3*h));
x1(i+1) = x1(i) + h*(k1+2*k2+2*k3+k4)/6;
y1(i+1) = y1(i) + h*(l1+2*l2+2*l3+l4)/6;
x2(i+1) = x2(i) + h*(k1+2*k2+2*k3+k4)/6;
y2(i+1) = y2(i) + h*(l1+2*l2+2*l3+l4)/6;
end
%draw
%plot(t,x1,'r',t,x2,'y')
%xlabel('t','fontsize',14,'fontweight','bold')
%ylabel('x1 & x2','fontsize',14,'fontweight','bold')
%set(gca,'Color','k')
%legend('x1','x2','TextColor','w')
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
x1=x1(101:300);
y1=y1(101:300);
x2=x2(101:300);
y2=y2(101:300);
X1dot=(x1(2:101)-x1(1:100))/h;
X2dot=(x2(2:101)-x2(1:100))/h;
Y1dot=(y1(2:101)-y1(1:100))/h;
Y2dot=(y2(2:101)-y2(1:100))/h;
hold on
M=zeros([100,10]);
for i=1:100
for j=1:32
if j==1
M(i,j)=1;
elseif j==2
M(i,j)=x1(i);
elseif j==3
M(i,j)=x2((i));
elseif j==4
M(i,j)=y1((i));
elseif j==5
M(i,j)=y2((i));
elseif j==6
M(i,j)=x1(i)*x2(i);
elseif j==7
M(i,j)=y1((i))*y2((i));
elseif j==8
M(i,j)=x1((i))*y1((i));
elseif j==9
M(i,j)=x1((i))*y2((i));
elseif j==10
M(i,j)=x2((i))*y1((i));
elseif j==11
M(i,j)=x2((i))*y2((i));
elseif j==12
M(i,j)=x1(i)*x2(i)*y1(i);
elseif j==13
M(i,j)=x1(i)*x2(i)*y2(i);
elseif j==14
M(i,j)=x1(i)*y1(i)*y2(i);
elseif j==15
M(i,j)=x2(i)*y1(i)*y2(i);
elseif j==16
M(i,j)=x1(i)*x2(i)*y1(i)*y2(i);
elseif j==17
M(i,j)=x1(i)^2;
elseif j==18
M(i,j)=x2(i)^2;
elseif j==19
M(i,j)=y1(i)^2;
elseif j==20
M(i,j)=y2(i)^2;
elseif j==21
M(i,j)=x1(i)^2*x2(i);
elseif j==22
M(i,j)=x1(i)^2*y1(i);
elseif j==23
M(i,j)=x1(i)^2*y2(i);
elseif j==24
M(i,j)=x2(i)^2*x1(i);
elseif j==25
M(i,j)=x2(i)^2*y1(i);
elseif j==26
M(i,j)=x2(i)^2*y2(i);
elseif j==27
M(i,j)=y1(i)^2*x1(i);
elseif j==28
M(i,j)=y1(i)^2*x2(i);
elseif j==29
M(i,j)=y1(i)^2*y2(i);
elseif j==30
M(i,j)=y2(i)^2*x1(i);
elseif j==31
M(i,j)=y2(i)^2*x2(i);
else
M(i,j)=y2(i)^2*y1(i);
end
end
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Reconstructed Signal %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
h=0.05; %step size
t=0:h:400;
x1_rec = zeros(1,numel(t));
y1_rec = x1_rec;
x2_rec = x1_rec;
y2_rec = x1_rec;
x1_rec(1)=x1(1);
y1_rec(1)=y1(1);
x2_rec(1)=x2(1);
y2_rec(1)=y2(1);
%value of constants
%a1=x1
a1=0.0305;
a2=0.0000;
a3=0.0000;
a4=-3.2154;
a5=0.0000;
a6=0.0000;
a7=0.0000;
a8=0.0000;
a9=0.0000;
a10=-0.5857;
a11=0.0000;
a12=0.0000;
a13=0.0000;
a14=0.0000;
a15=0.0000;
a16=0.0000;
a17=0.0000;
a18=0.0000;
a19=0.0000;
a20= 0.2412;
a21=0.0000;
a22=0.0000;
a23=0.0000;
a24=0.0000;
a25=0.0000;
a26=0.0000;
a27=0.0000;
a28=0.0000;
a29=0.0000;
a30=0.0000;
a31=0.0000;
a32=0.0000;
%c=x2
c1=0.0305;
c2=0.0000;
c3=0.0000;
c4=-3.2154;
c5=0.0000;
c6=0.0000;
c7=0.0000;
c8=0.0000;
c9=0.0000;
c10=-0.5857;
c11=0.0000;
c12=0.0000;
c13=0.0000;
c14=0.0000;
c15=0.0000;
c16=0.0000;
c17=0.0000;
c18=0.0000;
c19=0.0000;
c20=0.2412;
c21=0.0000;
c22=0.0000;
c23=0.0000;
c24=0.0000;
c25=0.0000;
c26=0.0000;
c27=0.0000;
c28=0.0000;
c29=0.0000;
c30=0.0000;
c31=0.0000;
c32=0.0000;
%ode
p=@(x1_rec,y1_rec,x2_rec,y2_rec) a1+a2*x1_rec+a3*x2_rec+a4*y1_rec+a5*y2_rec+a6*x1_rec*x2_rec+a7*y1_rec*y2_rec+a8*x1_rec*y1_rec+a9*x1_rec*y2_rec+a10*x2_rec*y1_rec+a11*x2_rec*y2_rec+a12*x1_rec*x2_rec*y1_rec+a13*x1_rec*x2_rec*y2_rec+a14*x1_rec*y1_rec*y2_rec+a15*x2_rec*y1_rec*y2_rec+a16*x1_rec*x2_rec*y1_rec*y2_rec+a17*x1_rec^2+a18*x2_rec^2+a19*y1_rec^2+a20*y2_rec^2+a21*x1_rec^2*x2_rec+a22*x1_rec^2*y1_rec+a23*x1_rec^2*y2_rec+a24*x2_rec^2*x1_rec+a25*x2_rec^2*y1_rec+a26*x2_rec^2*y2_rec+a27*y1_rec^2*x1_rec+a28*y1_rec^2*x2_rec+a29*y1_rec^2*y2_rec+a30*y2_rec^2*x1_rec+a31*y2_rec^2*x2_rec+a32*y2_rec^2*y1_rec;
q=@(x1_rec,y1_rec,x2_rec,y2_rec) c1+c2*x1_rec+c3*x2_rec+c4*y1_rec+c5*y2_rec+c6*x1_rec*x2_rec+c7*y1_rec*y2_rec+c8*x1_rec*y1_rec+c9*x1_rec*y2_rec+c10*x2_rec*y1_rec+c11*x2_rec*y2_rec+c12*x1_rec*x2_rec*y1_rec+c13*x1_rec*x2_rec*y2_rec+c14*x1_rec*y1_rec*y2_rec+c15*x2_rec*y1_rec*y2_rec+c16*x1_rec*x2_rec*y1_rec*y2_rec+c17*x1_rec^2+c18*x2_rec^2+c19*y1_rec^2+c20*y2_rec^2+c21*x1_rec^2*x2_rec+c22*x1_rec^2*y1_rec+c23*x1_rec^2*y2_rec+c24*x2_rec^2*x1_rec+c25*x2_rec^2*y1_rec+c26*x2_rec^2*y2_rec+c27*y1_rec^2*x1_rec+c28*y1_rec^2*x2_rec+c29*y1_rec^2*y2_rec+c30*y2_rec^2*x1_rec+c31*y2_rec^2*x2_rec+c32*y2_rec^2*y1_rec;
%loop
for i=2:test_points
k1=p(x1_rec(i),y1_rec(i),x2_rec(i),y2_rec(i));
l1=q(x1_rec(i),y1_rec(i),x2_rec(i),y2_rec(i));
k2=p((x1_rec(i)+(h/2)*k1),(y1_rec(i)+(h/2)*l1),(x2_rec(i)+(h/2)*k1),(y2_rec(i)+(h/2)*l1));
l2=q((x1_rec(i)+(h/2)*k1),(y1_rec(i)+(h/2)*l1),(x2_rec(i)+(h/2)*k1),(y2_rec(i)+(h/2)*l1));
k3=p((x1_rec(i)+(h/2)*k2),(y1_rec(i)+(h/2)*l2),(x2_rec(i)+(h/2)*k2),(y2_rec(i)+(h/2)*l2));
l3=q((x1_rec(i)+(h/2)*k2),(y1_rec(i)+(h/2)*l2),(x2_rec(i)+(h/2)*k2),(y2_rec(i)+(h/2)*l2));
k4=p((x1_rec(i)+k3*h),(y1_rec(i)+l3*h),(x2_rec(i)+k3*h),(y2_rec(i)+l3*h));
l4=q((x1_rec(i)+k3*h),(y1_rec(i)+l3*h),(x2_rec(i)+k3*h),(y2_rec(i)+l3*h));
x1_rec(i+1) = x1_rec(i) + h*(k1+2*k2+2*k3+k4)/6;
%y1(i+1) = y1(i) + h*(l1+2*l2+2*l3+l4)/6;
x2_rec(i+1) = x2_rec(i) + h*(k1+2*k2+2*k3+k4)/6;
%y2(i+1) = y2(i) + h*(l1+2*l2+2*l3+l4)/6;
end
plot(x1_rec(1:length(x1)),'r','LineWidth',2)
plot(x2_rec(1:length(x2)),'b','LineWidth',2)

Antworten (1)

Walter Roberson
Walter Roberson am 26 Nov. 2020
You initialize y1_rec and y2_rec to all zero, and you assign 0 to y1_rec(1) and y2_rec(1), but you never assign anything non-zero to the entries.
  3 Kommentare
Heya :)
Heya :) am 26 Nov. 2020
If I don't use this command [x1_rec = zeros(1,numel(t));] then the size don't match.
Walter Roberson
Walter Roberson am 26 Nov. 2020
To summarize: you did not document the purpose of the code, and you did not provide a link to a description of the algorithm, so none of us has any idea what y1_rec and y2_rec should be.

Melden Sie sich an, um zu kommentieren.

Kategorien

Mehr zu Graphics Object Identification finden Sie in Help Center und File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by