Fsolve cannot continue error

I keep getting the error

Caused by:

Failure in initial objective function evaluation. FSOLVE cannot continue.

clear vars

global g m S Iyy l alpha_t zt CL0 CLa CLq cm0 Cmd cmq CD0 K1 K...
    cmap Fmax V0 nv rho0 nr Ve Cma He 

g = 9.80665;
m = 120000;
S =260;
Iyy = 9.72e6;
l = 6.608;
alpha_t = -2*pi/180;
zt = 0.5;
CL0 = 0; CLa = .453;
CLq = -.7;cm0 = -.025;Cmd = -1.46;
cmq = -15; CD0=0.0175;
K1 = 0; K=0.5; cmap=-3;
Fmax- 240000; V0 =1; nv=0;
rho0=1.225;
nr=.75;

Xcg = -0.025; %use different value
n= 20 %may want to use bigger number for report
%res_alfae=zeros(n.n); res
res_alpha_e = zeros(n,n);
res_delta_e = zeros(n,n);
res_throttle_e = zeros(n,n);

i=1;

for He = linspace(7000,12000,n)
    disp(i)
    
    i1 = 1;
    
    for Ve = linspace(222,278,n)
    
    Cma = CLa*Xcg;
    
    Xeq0 = [0 0 .5];
    Xeq = fsolve(@equil,Xeq0,optimset('Algorithm','Levenberg-Marquardt','Display','off','MaxIter',100000,'MaxFunEvals',1000000));
    res_alpha_e(i,i1) = Xeq(1);
    res_delta_e(i,i1) = Xeq(2);
    res_throttle_e(i,i1) = Xeq(3);
    
    i1 = i1 + 1;
    end
    i = i+1;
end

figure(1); contourf(linspace(222,278,n),linspace(7000,12000,n)/1000,res_alpha_e*180/pi);
figure(2); contourf(linspace(222,278,n),linspace(7000,12000,n)/1000,res_delta_e*180/pi);
figure(3); contourf(linspace(222,278,n),linspace(7000,12000,n)/1000,res_throttle_e);

Xcg=0;
Ve=240;
Cma=CLa*Xcg;
He = 10000;

%Calculating the equilibrium condition
Xeq0=[0 0 .5];
Xeq=fsolve(@equil,Xeq0,optimset('Display','iter','MaxIter',100000,'MaxFunEvals',100000));
alphe_e = Xeq(1); delta_e = Xeq(2); throttle_e = Xeq(3);
disp('Equilibrium Condition: alpha_e, delta_e, and throttle_e');
disp([[alpha_e delta_e]*180/pi throttle_e])

tf=45
x0=[Ve 0 0 ]
[t,x]=ode45('dynamic_2D',[0 tf],x0)

V = x(:,1);
gamma = x(:,2);
alpha = x(:,3);
q = x(:,4);
H = x(:,5);
ground = V.*cos(gamma);

Answer 1

[Matt J]

The error message is complaining about your objective function, not about FSOLVE. Make sure your objective function equil() is working.