Generic engine oscillating output
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I am using the generic engine block in Simscape driveline, trying to simulate a test rig I am building with a small petrol engine and an electric motor in parallel. It has a tendency to go unstable and oscillate when I change the settings. This can be the settings in the engine block, the attached inertia blocks etc. I have attached the model. Below are two plots, the difference between them is simply the simulation time was changed from 6 to 7 seconds.![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/294634/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/294634/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/294639/image.png)
0 Kommentare
Antworten (1)
Martin
am 20 Jul. 2020
Hi Stephen,
This looks like the oscillation is due to the interactions between the slipping pullies in the two belt drives. If you are using R2019b or later, consider if the slip needs to be modelled. If not, set the top Belt Drive belt type to Ideal.
Martin
0 Kommentare
Siehe auch
Kategorien
Mehr zu Simscape Driveline finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!