Optimization based on inputs and outputs (for online optimization)
7 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Frank
am 23 Okt. 2012
Beantwortet: Paulo Naves
am 29 Jul. 2019
Hi,
I want to do online optimization in a simulink real-time environment. I dont have a plant model, the plant is in the 'real' world and controlled via simulink.
The procedure for optimization could look like this:
- apply step change with initial parameters
- record response --> calculate benchmark
- give benchmark to optimization algorithm --> calculate new parameters
- apply step change with new parameters
-...
is there a way to use optimization functions such as fminsearch by giving them just the input and the output of a system? (instead of the function it self)
Cheers, Frank
2 Kommentare
Ryan G
am 23 Okt. 2012
Why don't you use the real plant to create a linear system using system identification? Essentially you can send sweeps, sin waves etc into the system, record the output and then use the I/O relation to create a linear system and do your design in Simulink instead of on a true non-linear system (which is very difficult).
Akzeptierte Antwort
Ryan G
am 25 Okt. 2012
I think any response is highly dependent on the system, so keep in mind it is difficult, even when described, to determine how I think the system would behave and the best options.
That being said, when I see the step response, even with a nonlinear system, I think control design, linear models etc. MATLAB has the PID Tuner that makes this realtively easy and looptune if you are doing more than PID. However, these require linear systems.
Simulink Design Optimization is the closest thing you could do with a non-linear system, but it's still a tough problem (again, depending on what the system is).
You could do the optimization manually by setting the gains/parameters as tunable in the simulink model and tuning them as you run. But actually using an optimization algorithm with the real-time system, in my opinion, makes this more challenging.
3 Kommentare
Aly
am 12 Mär. 2013
Hello frank I have a similar task of optimizing a real-time system like you described. Can you please share how did you solve it ? thanks
Weitere Antworten (3)
Paulo Naves
am 28 Jul. 2019
I have been facing the same difficult and have not yet found a reasonable solution on the forum. I appreciate any help.
0 Kommentare
Rajiv Singh
am 29 Jul. 2019
Please look at Simulink Design Optimization product. You can run simulation based optimization of chosen parameters and states while choosing your own custom minimization objective.
0 Kommentare
Paulo Naves
am 29 Jul. 2019
I have tried to run Simulink Design Optimization, it worked very well using "Normal Mode" , like it was done on this video (https://www.youtube.com/watch?v=EfIdQ8YopgI)
But when I change to "External Mode", in my study trying to use each iteration step as a rotation velocity for DC motor connected to an arduino ( it works well without optimization loop) I find this error: Changing property 'ReturnWorkspaceOutputsName' is not allowed.
Thanks in advance
0 Kommentare
Siehe auch
Kategorien
Mehr zu Loop-Shaping Design finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!