Question on using geometryFromMesh
11 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Shengyue Shan
am 20 Nov. 2019
Kommentiert: Shengyue Shan
am 21 Nov. 2019
Hi all,
I came across a problem when using geometryFromMesh. I have a mesh file for a 3D geometry generated from COMSOL, and I would like to use it in pde toolbox in MATLAB. The COMSOL file contains the coordinates for the nodes, which is a Nnodes-by-3 matrix and the element information which is a Nelements-by-4 matrix. I rearranged the node matrix and element matrix, and put them in the form in 3-by-Nodes form and 4-by-Nelements form as indicated in https://www.mathworks.com/help/pde/ug/pde.pdemodel.geometryfrommesh.html#buvjb86-nodes
However, there is still a warning saying that there is node ID missing and it should start from 1. However, if I add a row for node ID the matrix will not be 3-by-Nodes.
Is there anything that I missed that caused this problem?
Than you very much!
Best regards,
Shengyue
0 Kommentare
Akzeptierte Antwort
Ravi Kumar
am 21 Nov. 2019
It looks like the node IDs from COMSOL might be 0 based. That is first node ID in COMSOL may be 0, in MATLAB it must be 1. You can check this by:
min(elementMatrix,[],'all')
If the answer is 0, then you need to just add 1 to elementMatrix:
elementMatrix = elementMatrix+1;
Regards,
Ravi
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Boundary Conditions finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!