How to control a Synchronous Machine Salient Pole (standard) in motoring mode with speed input?
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
AndreiG
am 27 Jun. 2019
Beantwortet: Joel Van Sickel
am 18 Aug. 2020
I use the Synchronous machine block from Simscape and I need to operate it as generator and then change it to motor mode while having speed as input. I can open and close the breaker, it does not have to be seemless.
How could I do that? I understood Power Factor control is a good procedure but how it can be implemented?
The only things which I can control is the field voltage and current.
I managed to achieve that by using a negative torque input but for my application that is not possible. Any suggestion is welcomed. Thank you!
![Capture.PNG](https://www.mathworks.com/matlabcentral/answers/uploaded_files/226595/Capture.png)
0 Kommentare
Akzeptierte Antwort
Joel Van Sickel
am 18 Aug. 2020
Hello,
I recommend using voltage and current as input into the motor controller as well, instead of just looking at speed which in your model is fixed and won't give you enough information to control anything. With current and voltage, you can determine the power in/out and similarly, if you are generating or motoring. There are numerous articles out there for controlling synchronous machines. I would find one that conceptually makes sense to you and start there.
Here is a generic example for control. You can't use the output as it requires an inverter, but it does have numerous calculations like clark/park that could be useful for you.
Regards,
Joel
0 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Electrical Systems finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!