Loading a Simhydraulic Motor
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I'm working on a system where I will want to put a load onto a hydraulic motor so that the system will develop pressure. In the SImHydraulics package there appear to be two hydraulic motors, "Hydraulic Motor" and "Variable Displacement Motor". Both of these include under their assumptions "No loading on the motor shaft, such as inertia, friction, spring, and so on, is considered." This would seem to indicate that it is not possible to load a hydraulic motor, which doesn't really make sense. Am I misunderstanding this statement or is it not at all possible to load one of these motors?
If I wanted to create back pressure using a hydraulic motor is there another approach I should take?
Thank you, -Andrew
0 Kommentare
Akzeptierte Antwort
Guy Rouleau
am 8 Jun. 2012
The doc statement means that the Hydraulic motor itself does not include loads such mass spring and damping.
This means that you need to use blocks from the Mechanical section of the Simscape foundation to apply load, for example Torque Actuator, Rotational Spring, Inertia, etc...
See demos like "sh_hydraulic_transmission_secondary_control.mdl" or "sh_actuation_system_cartridge_valve.mdl" for example.
0 Kommentare
Weitere Antworten (0)
Communitys
Weitere Antworten in Power Electronics Control
Siehe auch
Kategorien
Mehr zu Upgrading Hydraulic Models to Use Isothermal Liquid Blocks finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!