Algebraic loop in PV array block
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Hi, I found problem when using PV array block in simulink, my simulation stopped when the algebraic loop was found. It's located in the diode inside the block.
I have tried insert the unit delay block at the feedback (Vd) inside the mask but the problem still cannot be solved. Not sure it's the correct way or not.
Here's the snapshot from my simulation and where I put the unit delay
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/191075/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/191076/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/191077/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/191078/image.jpeg)
And this is my setup for solver
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/191079/image.jpeg)
Suggestion would be very appreciated, thank you very much
0 Kommentare
Antworten (3)
Siddiq Muhammad
am 30 Aug. 2018
I found the solution for it . add a unit delay before the error . add it before addition/division/subtraction/multiplication.
0 Kommentare
Siehe auch
Kategorien
Mehr zu Subsystems finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!