filter coefficients
46 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Just a quick question - are 'filter coefficients' the coefficients of the impulse response, desired transfer function, or actual transfer function?
2 Kommentare
Matt Fig
am 2 Nov. 2012
Just a quick question - are 'filter coefficients' the coefficients of the impulse response, desired transfer function, or actual transfer function?
Akzeptierte Antwort
Wayne King
am 25 Mai 2012
That depends. The filter coefficients are the coefficients of the difference equation. If your filter is an FIR filter, then the filter coefficients are the values of the impulse response.
If you have an IIR filter, then the filter coefficients are not the same as the impulse response. Remember in that case the impulse response is infinite.
For example:
b = fir1(10,0.2);
stem(b)
h = impz(b);
stem(h)
isequal(b',h)
but
[b,a] = butter(10,0.2);
h = impz(b,a);
But the ratio of Z-transforms of the numerator coefficients to denominator coefficiens is equal to the Z-transform of the impulse response.
For example - consider the IIR system with the following difference equation
y(n)-0.8*y(n-1) = x(n)
So the filter coefficients are:
A = [1 -0.8]; B =1;
The impulse response is:
h(n) = 0.8^n*u(n) where u(n) is the unit step. But compare:
h1 = impz(B,A);
subplot(211)
stem(h1,'color',[1 0 0]);
subplot(212)
n = 0:length(h1)-1;
h = 0.8.^n;
hold on;
stem(h,'color',[0 0 1]);
Weitere Antworten (2)
Wayne King
am 28 Mai 2012
The unit step should be treated in your DSP book.
For a sequence, the unit step sequence is the sequence which is 1 for n>=0 and 0 for all n<0.
As far as your other question, I solved the difference equation. I think if you search the web, you will find plenty of material on solving difference equations. This forum does not lend itself to me walking through that solution here.
0 Kommentare
Siehe auch
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!