How to implement partial band noise jamming in matlab?
10 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I am intended to implement communications schemes in the presence of jammming. So how can i implement jaming in matlab?
[Merged information from duplicate question]
i am doing a project in simulation and evaluation of different digtal modulation shemes in the presence of jamming. so i need to know how can i implement partial band noise jamming in awgn channel.
1 Kommentar
Antworten (1)
Mahsa Hassankashi
am 25 Aug. 2021
I think it is too late, but I hope it helps someone who refer to this question later.
As you use Bit Error Analysis Tool.
You need the proper coefficient for Eb/No which is defined as the normalized signal-to-noise ratio. For an instance, there are solutions for QASK, QPSK Modulations as follows:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/720579/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/720584/image.png)
I found the answer from the below article:
Coherent Detection of Frequency-Hopped Quadrature Modulations in the Presence of Jamming-Part I: QPSK and QASK Modulations, the authors are MARVIN K. SIMON, FELLOW, IEEE, AND ANDREAS POLYDOROS , and article is from IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. COM-29, NO. 11, NOVEMBER 1981.
0 Kommentare
Siehe auch
Kategorien
Mehr zu QPSK finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!