How to export data from simulink
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
HamidReza Saleh
am 19 Sep. 2016
Kommentiert: HamidReza Saleh
am 22 Sep. 2016
Hi
Im trying to export data from my simulink i created an M-file that use For loops and set_param command to configure different setting such as different KM different resistance for fault ... etc then run Simulink and get data as this M-file uses for loop my first concern is overwriting data and by it i mean losing some data ? would this happen ? considering that i use several out block that fill yout parameter , do you gusy have some idea or suggestion for this ?? is there any that i can gather data from my simulink model without configuring and ruining by manual for several times ??
thanks
0 Kommentare
Akzeptierte Antwort
Nihar Deodhar
am 20 Sep. 2016
This could be done by simply setting the output of simulation to be a vector.
set the max number of simulation s to be performed (i).
model = 'type_model_name_here';
load_system(model);
i = 100; % say you have 100 simulation runs
simout_a(i) = Simulink.SimulationOutput;
for j=1:i
set_param([model '/Constant1'], 'Value', num2str(var(j)));
set_param([model '/Constant2'], 'Value', num2str(var(j)^2));
set_param([model '/Constant3'], 'Value', num2str(var_2(j)));
simout_a(j) = sim(model, 'SimulationMode', 'normal');
end
When you need output for Nth simulation, just index simout(N).time or simout(N).datalog
0 Kommentare
Weitere Antworten (1)
HamidReza Saleh
am 20 Sep. 2016
9 Kommentare
Nihar Deodhar
am 22 Sep. 2016
First off I did not see a line at the beginning that say something like:
simout_a(i) = Simulink.SimulationOutput;
Ok, lets say you have it somewhere (because you have to initialize the output array).
Furthermore, You are adding output to simout_a only in one case (j=11). Doing this will only give you one simout_a(11) struct with contents and the others will be empty. So I think what you intend to have is the sim command outside of if-else statement. Aslo, if-else statement chain should have the last 'else condition' not an 'elseif'. This is not a thumb rule, but just wanted to add the last point.
Siehe auch
Kategorien
Mehr zu Programmatic Model Editing finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!