BER simulation in OFDM with amplitude clipping
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Im an university student who strugling with final year project regarding " Amplitude clipping for reduce PAPR in OFDM". Up to now i have done all the coding to simulate amplitude clipping for limit the high amplitudes but struglling with getting the BER plot for non clipped and clipped signals.
I have very much thankful to u if u could kind enough to make that little coding for me to make sucess my project. For the convenience i , did attach my math lab file
% ---------------
% A: Setting Parameters
% ---------------
M = 4; % QPSK signal constellation
no_of_data_points = 128; % have 128 data points
block_size = 8; % size of each ofdm block
cp_len = ceil(0.1*block_size); % length of cyclic prefix
no_of_ifft_points = block_size; % 128 points for the FFT/IFFT
no_of_fft_points = block_size;
% ---------------------------------------------
% B: % +++++ TRANSMITTER +++++
% ---------------------------------------------
% 1. Generate 1 x 128 vector of random data points
data_source = randsrc(1, no_of_data_points, 0:M-1);
figure(1)
stem(data_source); grid on; xlabel('Data Points'); ylabel('transmitted data phase representation')
title('Transmitted Data "O"')
% 2. Perform QPSK modulation
qpsk_modulated_data = pskmod(data_source, M);
scatterplot(qpsk_modulated_data);title('MODULATED TRANSMITTED DATA');
% 3. Do IFFT on each block
% Make the serial stream a matrix where each column represents a pre-OFDM
% block (w/o cyclic prefixing)
% First: Find out the number of colums that will exist after reshaping
num_cols=length(qpsk_modulated_data)/block_size;
data_matrix = reshape(qpsk_modulated_data, block_size, num_cols);
% Second: Create empty matix to put the IFFT'd data
cp_start = block_size-cp_len;
cp_end = block_size;
% Third: Operate columnwise & do CP
for i=1:num_cols,
ifft_data_matrix(:,i) = ifft((data_matrix(:,i)),no_of_ifft_points);
% Compute and append Cyclic Prefix
for j=1:cp_len,
actual_cp(j,i) = ifft_data_matrix(j+cp_start,i);
end
% Append the CP to the existing block to create the actual OFDM block
ifft_data(:,i) = vertcat(actual_cp(:,i),ifft_data_matrix(:,i));
end
% 4. Convert to serial stream for transmission
[rows_ifft_data cols_ifft_data]=size(ifft_data);
len_ofdm_data = rows_ifft_data*cols_ifft_data;
% Actual OFDM signal to be transmitted
ofdm_signal = reshape(ifft_data, 1, len_ofdm_data);
figure(3)
plot(real(ofdm_signal)); xlabel('Time'); ylabel('Amplitude');
title('OFDM Signal');grid on;
% ---------------------------------------------------------------
% C: % +++++ clipping as a PAPR reduction method +++++
% ---------------------------------------------------------------
avg=0.4;
clipped=ofdm_signal;
for i=1:length(clipped)
if clipped(i) > avg
clipped(i) = avg;
end
if clipped(i) < -avg
clipped(i) = -avg;
end
end
figure(4)
plot(real(clipped)); xlabel('Time'); ylabel('Amplitude');
title('clipped Signal');grid on;
% ------------------------------------------
% D: % +++++ HPA +++++
% ------------------------------------------
%To show the effect of the PA simply we will add random complex noise
%when the power exceeds the avg. value, otherwise it add nothing.
% 1. Generate random complex noise
noise = randn(1,len_ofdm_data) + sqrt(-1)*randn(1,len_ofdm_data);
% 2. Transmitted OFDM signal after passing through HPA
%without clipping
for i=1:length(ofdm_signal)
if ofdm_signal(i) > avg
ofdm_signal(i) = ofdm_signal(i)+noise(i);
end
if ofdm_signal(i) < -avg
ofdm_signal(i) = ofdm_signal(i)+noise(i);
end
end
figure(5)
plot(real(ofdm_signal)); xlabel('Time'); ylabel('Amplitude');
title('OFDM Signal after HPA');grid on;
%with clipping
avg=0.4;
for i=1:length(clipped)
if clipped(i) > avg
clipped(i) = clipped(i)+noise(i);
end
if clipped(i) < -avg
clipped(i) = clipped(i)+noise(i);
end
end
figure(6)
plot(real(clipped)); xlabel('Time'); ylabel('Amplitude');
title('clipped Signal after HPA');grid on;
% --------------------------------
% E: % +++++ CHANNEL +++++
% --------------------------------
% Create a complex multipath channel
channel = randn(1,block_size) + sqrt(-1)*randn(1,block_size);
% ------------------------------------------
% F: % +++++ RECEIVER +++++
% ------------------------------------------
% 1. Pass the ofdm signal through the channel
after_channel = filter(channel, 1, ofdm_signal);
% 2. Add Noise
awgn_noise = awgn(zeros(1,length(after_channel)),0);
% 3. Add noise to signal...
recvd_signal = awgn_noise+after_channel;
% 4. Convert Data back to "parallel" form to perform FFT
recvd_signal_matrix = reshape(recvd_signal,rows_ifft_data, cols_ifft_data);
% 5. Remove CP
recvd_signal_matrix(1:cp_len,:)=[];
% 6. Perform FFT
for i=1:cols_ifft_data,
% FFT
fft_data_matrix(:,i) = fft(recvd_signal_matrix(:,i),no_of_fft_points);
end
% 7. Convert to serial stream
recvd_serial_data = reshape(fft_data_matrix, 1,(block_size*num_cols));
% 8. Demodulate the data
qpsk_demodulated_data = pskdemod(recvd_serial_data,M);
figure(7)
stem(qpsk_demodulated_data,'rx');
grid on;xlabel('Data Points');ylabel('received data phase representation');title('Received Data "X"')
% ----------------------------------------------------
% F: % +++++ RECEIVER of clipped signal +++++
% ----------------------------------------------------
% 1. Pass the ofdm signal through the channel
after_channel = filter(channel, 1, clipped);
% 2. Add Noise
awgn_noise = awgn(zeros(1,length(after_channel)),0);
% 3. Add noise to signal...
recvd_signal = awgn_noise+after_channel;
% 4. Convert Data back to "parallel" form to perform FFT
recvd_signal_matrix = reshape(recvd_signal,rows_ifft_data, cols_ifft_data);
% 5. Remove CP
recvd_signal_matrix(1:cp_len,:)=[];
% 6. Perform FFT
for i=1:cols_ifft_data,
% FFT
fft_data_matrix(:,i) = fft(recvd_signal_matrix(:,i),no_of_fft_points);
end
% 7. Convert to serial stream
recvd_serial_data = reshape(fft_data_matrix, 1,(block_size*num_cols));
% 8. Demodulate the data
qpsk_demodulated_data = pskdemod(recvd_serial_data,M);
figure(8)
stem(qpsk_demodulated_data,'rx');
grid on;xlabel('Data Points');ylabel('received data phase representation');title('Received Data clipped "X"')
0 Kommentare
Antworten (2)
Siehe auch
Kategorien
Mehr zu OFDM finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!