How to create this transfer function Block?
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Siripot Ruglheck
am 17 Aug. 2015
Bearbeitet: Sebastian Castro
am 17 Aug. 2015
I have a problems about How to create the transfer function block same in picture (I attached in this topic) by use simulink.
Thank you.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/148155/image.jpeg)
0 Kommentare
Akzeptierte Antwort
Sebastian Castro
am 17 Aug. 2015
Bearbeitet: Sebastian Castro
am 17 Aug. 2015
Ah, good old ramp tracking filters...
If you have the Control System Toolbox, you can use an LTI System block and enter the following in the block dialog:
( tf([T8 1],1) / (tf([T9 1],1))^M )^N
Otherwise, if you do not have access to the toolbox and the built-in transfer function objects, you can use a regular Simulink Transfer Fcn block. The numerator and denominator can be found using the conv function, though this will be a little tougher to figure out.
- Sebastian
0 Kommentare
Weitere Antworten (1)
Siripot Ruglheck
am 17 Aug. 2015
Bearbeitet: Siripot Ruglheck
am 17 Aug. 2015
1 Kommentar
Sebastian Castro
am 17 Aug. 2015
Oops, good catch. I totally messed that up :)
Corrected my post so others seeing this don't copy the wrong thing too.
Siehe auch
Kategorien
Mehr zu Measurements and Statistics finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!