margin command on a system with transfer function on reference
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
montyynis
am 6 Aug. 2015
Beantwortet: Sriram Narayanan
am 13 Aug. 2015
I have the following system (see picture). When calculating gain and phase margins with 'margin' command, should I consider L=GK to be an open loop transfer function (i.e. should I call margin(GK) )? If so, what difference does the transfer function H applied on the reference r make to gain and phase margins?
0 Kommentare
Akzeptierte Antwort
Sriram Narayanan
am 13 Aug. 2015
It depends on what you are using the Transfer Function H for. H would typically be used as a prefilter or for feedforward control. So, it should not be shaping the crossover frequency and therefore, would not have an effect on the gain/phase margins. However, you should calculate gain/phase margins using the open-loop GK to meet desired robustness/disturbance rejection requirement and the prefilter H could help is adjusting the reference to meet reference tracking requirement.
0 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Dynamic System Models finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!