Matlab Plotting command problem
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Jacob
am 7 Feb. 2024
Kommentiert: Sulaymon Eshkabilov
am 7 Feb. 2024
Hello,
I am having issues plotting a plot in Matlab with the following code below.
t=0:0.01:10
x1=11*cos(10*t+(3*pi/8));
plot(t,x1);
hold on
x2=3*cos(10*t-(pi/2));
plot(t,x2);
hold on
x3=x1+x2;
plot(t,x3);
legend('x1(t)=11*cos(10*t+(3*pi/8))','x2(t)=3*cos(10*t-(pi/2))','x3(t)=x1+x2');
title('2.c)');
For some reason when ever I run the above I get the following error and I am unable to determine what is wrong. I tried changing the wording of the plot commands just incase they had a problem but that didn't resolve the issue.
Any help is appreciated Thanks for your time!
2 Kommentare
Akzeptierte Antwort
Sulaymon Eshkabilov
am 7 Feb. 2024
Even though you have not mentioned any error, there is a tiny point linked with hold on command. It needs to be followed at the end with hold off to avoid ambiguity in case you'd plot a new set of data afterwards. And use of latex for legend labels might make the plot figure better look, etc., e.g.:
figure()
t=0:0.01:10;
x1=11*cos(10*t+(3*pi/8));
plot(t,x1, 'r','LineWidth',1.5);
hold on
x2=3*cos(10*t-(pi/2));
plot(t,x2, 'g:','LineWidth',2.5);
hold on
x3=x1+x2;
plot(t,x3, 'b-.', 'LineWidth',2.0);
legend({'$x_1(t)=11*cos(10*t+(3*pi/8))$','$x_2(t)=3*cos(10*t-(pi/2))$','$x_3(t)=x_1+x_2$'}, 'Interpreter','latex');
title('(2.c)');
xlabel('$t$', 'Interpreter','latex')
ylabel('$x_1(t), x_2(t), x_3(t)$', 'Interpreter','latex')
grid on
hold off % Use hold off not to plot over this figure
2 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Get Started with MATLAB finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!