Simulation Manager - Changing the X-axis

Hi,

I wonder if anyone can help? I would like to change the x-axis in the Simulation Manager from Runid to an angles (0 to 180 in 5 degree steps (37 in total)). Is there a simple way to do this? I don't seem to be able to locate a parameter in the model, do I need to set something up?

Thanks, Andy

Answer 1

[Andy]

Hi Divyanshu,

Many thanks for this, it works!

Best regards,

Andy

Answer 2

[Divyanshu]

Hi Andy,

The easiest way to Control the label of x-axis and what data should be displayed on the x-axis, is by setting the appropriate fields. You can find the corresponding fields under "Plot Properties".

Please refer the following documentation for further details:

https://www.mathworks.com/help/simulink/slref/simulationmanager.html#mw_ad17ba3d-09f8-4eff-bf5b-2ec678b6ff61

Hope it helps!

[Andy]

Hi Divyanshu,

Thank you for your reply. I have had a look under the "Plot Properties", the only options are: Runid or logsout{1} or tout.

I wish to either assign a new set of parameters for the x-axis from 0 – 180 degrees in 5-degree intervals or assign the parameter to the Runid.

This will then enable me to plot logsout{1} vs angle rather than logsout{1} vs Runid

Best regards,

Andy

[Divyanshu]

Hi,

You can make use of 'setVariable' function. Please refer the following example for better understanding about the usage of this function:

https://www.mathworks.com/help/simulink/ug/analyse-results-with-simulation-manager.html#mw_195fe01e-515b-4b9f-9ac1-493d518f3285

And for further details on 'setVariable' function please refer the following documentation:

https://www.mathworks.com/help/simulink/slref/simulink.simulationinput.setvariable.html