Runge-Kutta-4th-order solution of 3 ODEs
46 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Turgut Ataseven
am 5 Jun. 2023
Kommentiert: Turgut Ataseven
am 5 Jun. 2023
Hi. Lorenz equations are as follows:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1403574/image.jpeg)
Parameter values: sigma = 10, b = 8/3, and r = 28. Employ initial conditions of x = y = z = 5 and integrate from t = 0 to 20. For this case, we will use the fourth-order RK method to obtain solutions with a constant time step of h = 0.03125.
Graph we need to obtain after plotting x, which is y(1), versus t is as follows:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1403579/image.jpeg)
However obtained numerical values converge to zero, so that yl(end,1) = -6.49e-48. The graph we get instead is:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1403584/image.jpeg)
Codes are given below. LorenzPlot.m is run to obtain the graph.Can you please provide the corrections for the code? Thanks.
LorenzPlot.m
h = 0.03125; % Stepsize
tspan = [0 20]; % Time interval
y0 = [5 5 5]; % Initial conditions
a = 10;
b = 8/3;
r = 28;
[tl, yl] = ode45(@(t,y)lorenz(t,y,a,b,r),tspan,y0);
%[tl, yl] = rk4sys(@lorenz,tspan,y0,h,a,b,r); % RK4 solution
% Time-series plot using RK4 method
figure(1)
plot(tl,yl(1:end,1))
legend('x = y = z = 5')
title('RK4 time plot')
xlabel("Time")
ylabel("Quantity")
rk4sys.m
function [tp,yp] = rk4sys(dydt,tspan,y0,h,varargin)
% Reference: Chapra, S. C. (2018). Applied Numerical Methods
% with MATLAB® for Engineers and Scientists Fourth Edition, pp.602-603
% rk4sys: fourth-order Runge-Kutta for a system of ODEs
% [t,y] = rk4sys(dydt,tspan,y0,h,p1,p2,...): integrates
% a system of ODEs with fourth-order RK method
% input:
% dydt = name of the M-file that evaluates the ODEs
% tspan = [ti, tf]; initial and final times with output
% generated at interval of h, or
% = [t0 t1 ... tf]; specific times where solution output
% y0 = initial values of dependent variables
% h = step size
% p1,p2,... = additional parameters used by dydt
% output:
% tp = vector of independent variable
% yp = vector of solution for dependent variables
if nargin < 4,error('at least 4 input arguments required'), end
if any(diff(tspan)<= 0),error('tspan not ascending order'), end
n = length(tspan);
ti = tspan(1);tf = tspan(n);
if n == 2
t = (ti:h:tf)'; n = length(t);
if t(n)<tf
t(n + 1) = tf;
n = n + 1;
end
else
t = tspan;
end
tt = ti; y(1,:) = y0;
np = 1; tp(np) = tt; yp(np,:) = y(1,:);
i = 1;
while(1)
tend = t(np + 1);
hh = t(np + 1) - t(np);
if hh > h,hh = h;end
while(1)
if tt+hh > tend,hh = tend-tt;end
k1 = dydt(tt,y(i,:),varargin{:})';
ymid = y(i,:) + k1*hh/2;
k2 = dydt(tt + hh/2,ymid,varargin{:})';
ymid = y(i,:) + k2*hh/2;
k3 = dydt(tt + hh/2,ymid,varargin{:})';
yend = y(i,:) + k3*hh;
k4 = dydt(tt + hh,yend,varargin{:})';
phi = (k1 + 2*(k2 + k3) + k4)/6;
y(i + 1,:) = y(i,:) + phi*hh;
tt = tt + hh;
i = i + 1;
if tt >= tend,break,end
end
np = np + 1; tp(np) = tt; yp(np,:) = y(i,:);
if tt >= tf,break,end
end
end
lorenz.m
function yl = lorenz(t,y,a,b,r)
yl = [-a*y(1)-a*y(2);
r*y(1)-y(2)-y(1)*y(3);
-b*y(3)+y(1)*y(2)];
end
0 Kommentare
Akzeptierte Antwort
Sam Chak
am 5 Jun. 2023
Fix the code as indicated below:
tspan = [0 20]; % Time interval
y0 = [5 5 5]; % Initial conditions
[tl, yl] = ode45(@lorenz, tspan, y0); % RK4 solution
% Time-series plot using RK4 method
figure(1)
% plot(tl,yl(1:end,1))
plot(tl, yl)
legend('x = y = z = 5')
title('RK4 time plot')
xlabel("Time")
ylabel("Quantity")
function yl = lorenz(t, y)
a = 10;
b = 8/3;
r = 28;
yl = [- a*y(1) + a*y(2); % <-- fix this line
r*y(1)-y(2) - y(1)*y(3);
- b*y(3) + y(1)*y(2)];
end
1 Kommentar
Siehe auch
Kategorien
Mehr zu Ordinary Differential Equations finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!