Generate trapezoidal waveform from a square waveform using convolution
31 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Victor Dos Santos
am 9 Mär. 2023
Kommentiert: William Rose
am 9 Mär. 2023
Hello,
I try to generate a trapezoidal waveform from a square waveform using convolution using rectpuls() and fft() but I don't manage to obtain the good result with correct amplitude (i.e. same as the original signal). Could you please help me ?
Thank you !
Example:
t = 0:10e-6:10;
signal = 270*square(t);
trise=100e-6;
x = rectpuls(t-trise/2,trise);
conv = ifft(fft(signal).*fft(x));
figure
plot(t,signal,'k-+'); hold on
plot(t,conv,'r-s'); hold on
legend('signal', 'conv')
xlabel('Time (s)')
ylabel('Signal (-)')
0 Kommentare
Akzeptierte Antwort
William Rose
am 9 Mär. 2023
Bearbeitet: William Rose
am 9 Mär. 2023
[edit correct capitalization errors]
Your convolution worked and it did produce a trapezoidal signal. You just need to zoom in more on the transitions to see the trapezoidal shape. See zoomed-in plot below.
If you want wider transitions, then you need to make the signal x have a wider pulse. In its present form, the pulse in x is only 0.0001 time units long.
4 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Waveform Generation finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!