Problems using 'tfest' for generating transfer function
43 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
RITAM BASU
am 4 Nov. 2022
Kommentiert: Mathieu NOE
am 28 Nov. 2022
Hello guys...
I am trying to find a transfer function for my signal, that matches with the moving average block of my signal. I used tfest to recreate the signal using the generated coefficients. However, the accuracy is very low at 2%. I am wondering how to increase it, or am I doing something wrong.
In another case, to verify whether the function works, I tried with tf = 1/(s+1), generated the signals, used 'tfest' to get the transfer function, I got 0.1404/(s+0.1998) , which is way-way off.
let me know what you think of this.
Have a nice day..
data_0= iddata(T_avg_mean,T_pedal,0.01);
>> tf_estimated = tfest(data_0,2)
tf_estimated =
From input "u1" to output "y1":
-0.0188 s + 0.005945
--------------------------
s^2 + 7.891e-06 s + 0.4232
Continuous-time identified transfer function.
Parameterization:
Number of poles: 2 Number of zeros: 1
Number of free coefficients: 4
Use "tfdata", "getpvec", "getcov" for parameters and their uncertainties.
Status:
Estimated using TFEST on time domain data "data_0".
Fit to estimation data: 2.051%
FPE: 128.3, MSE: 128.3
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1181293/image.png)
10 Kommentare
Akzeptierte Antwort
Mathieu NOE
am 8 Nov. 2022
Verschoben: Mathieu NOE
am 17 Nov. 2022
hello again
here a bunch of files to post process your data
I don't have the ID toolbox but I have the Signal Processing Tbx ( I use invfreqz to get the num/den model from a frequency domain model (cf Bode plot)
the Bode plot and coherence plot is obtained with my function mytfe_and_coh.m (also attached)
coherence plot is also good to have to make sure the input signal (x) has energy distributed accross the entire frequency range (otherwise the results may be inaccurate in frequency domain that has been poorly excited);
I don't put all the codes here in the window otherwise it's gonna be very clutered
see the attachements and maybe that can help you
see identified models Bode plots are precisely matchind the tfe Bode plot
NB : I identified the models in the discrete domain, use d2cm to get back to continuous if needed
0 Kommentare
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Transfer Function Models finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!