Serial Data signal Generation
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Ibnul Feraji Alam
am 9 Mär. 2022
Kommentiert: Benjamin Thompson
am 15 Mär. 2022
How to generate a signal of fixed length of 6 bytes. The massage are transfered in 15ms cycle. Baud rate 38400, data bits 8, parity none, stop bits 1, CRC 16.
Example signal : AA 20 AA 02 IC IE.
Serial Data Format
0 Kommentare
Akzeptierte Antwort
Benjamin Thompson
am 9 Mär. 2022
See if one of the examples on the File Exchange will work for you:
Then if you run into problems ask a specific question and post your work.
8 Kommentare
Benjamin Thompson
am 15 Mär. 2022
I don't know what the "create and connect generator" does. Connect a constant source block to your Serial Send Block input. Give the constant block a value of 170 decimal, and configure its output data type to uint8.
As for the other parameters, it is your device. The header and terminator could be your STX and ETX characters. Blocking mode, you may have to try it with and without that checked to see what works best for timing.
Then when you are sure the serial port is sending out three bytes (STX + 170 + ETX), then make the middle part the full six bytes long using the mux block like I showed in my example.
Weitere Antworten (0)
Siehe auch
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!